Planning a fireplace installation in Opa-locka
From footing to flue, a masonry fireplace follows the Florida Building Code's fireplace chapter step by step.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Worn prefab units and empty walls we plan around
- A prefab unit with a warped firebox
- An exterior chase that needs a new unit
- New construction with framing still open
- An old unit that fails its listing
Jump to
Before, during and after your fireplace installation
Consider parts support for the model you pick
A fireplace becomes a long-term part of the house. Its refractory, grate, screen and chimney parts wear and will need replacing over the years. A model with a current parts list and a maker that still supports it makes those later repairs straightforward.
We explain how to find the parts list for a model and why it matters. When a maker retires a model, listed parts can become hard to obtain. Keeping the manual and the model details on file helps whoever services the fireplace later order the right pieces.
Decorative shrouds only when listed
A decorative shroud can dress up a chimney top, but the code allows one on a factory-built system only when it is listed for that specific fireplace and chimney. An unlisted shroud can trap heat or disturb the draft at the termination. It is not a cosmetic choice alone.
If you want a shroud, we check the maker's list of approved shrouds for your model. Where none is listed, the standard termination cap stays. We explain the look of each option so the decision about the roofline is still yours.
Firebox depth and throat set by code
The code gives a masonry firebox a minimum depth and places the throat a set distance above the opening. The passage through the throat, damper and smoke chamber may not be smaller than the flue itself. These proportions decide how well smoke leaves the room.
A shallow, tall Rumford-style firebox is allowed under its own set of proportions. If you like that look, we explain what changes in the design. Either way, the proportions are drawn before construction so the fireplace draws as well as it looks.
Adding a fireplace to a finished room
In a finished room, the fireplace path runs through existing drywall, ceilings, attic insulation and roof covering. Each opening has to be cut, framed, protected and later patched or finished. The work is manageable when it is planned in the right order.
We explain which surfaces will be opened and who restores each one. Patching drywall around a new chase may be ours, while painting the room may be yours or a painter's. The estimate lists those boundaries so the finished room has no loose ends.
Items we price separately for a new fireplace
- Noncombustible board and face materials
- Manual, listing label and serial number record
- Masonry chimney lining and cleanout plan
- Grate, screen and supplied accessories check
Installing a fireplace in Opa-locka, your questions
Can a fireplace go in a room with no chimney today?
Often it can. A factory-built unit brings its own listed chimney, which runs up through the house or an exterior chase. The free inspection shows whether the joists, attic and roof give that chimney a workable path in Opa-locka.
Which suits my house, a factory-built or a masonry fireplace?
It depends on the structure, the room and how you plan to use the fire. Masonry needs a footing and more time, while a factory-built unit is framed in and follows its listing. We explain both for your house after the inspection.
Where should furniture sit relative to the new fireplace?
Outside the clear space the manual prints for your model. Curtains, chairs and stored items stay back, and nothing combustible sits on the hearth extension. We point out the zone at handover so you can arrange the room.
More Ways to Care for Your Fireplace
- Fireplace RestorationCoordinate fireplace repairs while preserving suitable existing features and defining the intended use.
- Chimney Leak RepairFind the chimney water entry point and plan a repair before restoring the damaged finish.
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
- Firebox RepairRepair the damaged fireplace chamber using an approach suited to masonry or manufactured components.
- Chimney Flue RepairAssess repairs to damaged existing flue linings and distinguish them from a new liner installation.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo