Wood fireplace installation and chimney planning in Overtown
A wood fireplace built or installed to its listing and the code, with each part of the job priced separately.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When a new fireplace is the right call in Overtown
- Smoke rolling out of an old unit
- Cracked panels in a worn-out unit
- Chimney parts from mixed brands
- An enclosure too small for newer units
Jump to
From listing label to first fire, the installation
Flush or raised hearth, decided early
Some units can sit at floor level, while others are raised on a platform. The height changes the hearth extension the manual requires and sometimes the protection needed beneath it. It also changes how the fire looks from a chair and how easy the firebox is to load.
Decide the hearth height before framing starts, because it sets the whole opening. We explain what the manual requires at each height you are considering. A choice made late can mean reframing, which is avoidable when the question is answered first.
The supplied grate and screen
The grate and firescreen supplied with a factory-built fireplace are part of its design. Manuals ask owners to use only the maker's grate, because it holds the fire where the unit expects it. The screen controls sparks but does not stop a log from rolling out.
We check that both are present and fitted before handover. If you prefer a different grate style, we look for one the maker approves for your model. An oversized aftermarket grate can push the fire against the refractory and shorten its life.
Outline the fireplace on the wall first
Before choosing a model, mark its opening, face and hearth extension on the wall and floor with tape. Seeing the real size in the room answers questions a brochure cannot. It also shows how the clear space in front of the fire affects your furniture.
We can bring outline dimensions for a few candidate models to the inspection. Taping them up takes minutes and often settles the choice. A size that felt small on paper can dominate a room, and the reverse happens too.
Starting fires without flammable liquids
Manuals warn against using gasoline, lantern fuel, kerosene or charcoal lighter fluid to start or freshen a wood fire. Those liquids can flash and overfire the unit. Paper, dry kindling and a pre-warmed flue do the job safely.
We show you the lighting method your manual describes, including how to warm the flue so smoke rises from the start. Keep flammable liquids and their vapors stored well away from the fireplace room. A calm start makes for a clean fire and a cleaner chimney.
Parts of the job your installation estimate separates
- Factory-built unit and its listed chimney
- Chase framing for an exterior chimney
- Exhaust fans and house pressure review
- Break-in fire guidance at handover
Common questions on masonry and prefab installation
Can the old chimney pipe stay when a prefab unit is replaced?
Usually not. The new fireplace is listed with its own chimney, and mixing it with pipe from another system breaks that listing. We check the old pipe's markings and the new manual, and explain the rare cases where the maker allows reuse.
Do you set the tile or stone around the opening?
Only if the estimate names it. Often the finish belongs to a tile setter or mason. Either way, we mark the noncombustible zones and the mantel limit so whoever sets the finish works to the manual.
How soon can we light the new fireplace?
After the installation is complete and any required inspection is done. The early fires should be moderate so the paint and refractory can cure, as the manual explains. We go through the lighting routine with you at handover.
More Ways to Care for Your Fireplace
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
- Chimney Chase Cover ReplacementReplace the chase top with a properly planned cover and clearly defined pipe connections.
- Chimney Flue RepairAssess repairs to damaged existing flue linings and distinguish them from a new liner installation.
- Firebox RepairRepair the damaged fireplace chamber using an approach suited to masonry or manufactured components.
- Fireplace RestorationCoordinate fireplace repairs while preserving suitable existing features and defining the intended use.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo