New fireplace installation in Riverside Park, framing to first fire
Book the agreed installation no later than 72 hours after your free inspection and save 10% on it.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Situations that lead to a new wood fireplace
- A room with no fireplace yet
- Discontinued model with no listed parts
- A second fireplace for another room
- Chimney parts from mixed brands
Jump to
The engineering behind a new fireplace in Riverside Park
Choosing where the fireplace sits in the room
Location affects how a wood fire behaves. Installation manuals warn against spots with heavy air movement, such as beside a door people use often or near a return for the air conditioning. Drafts across the opening can pull smoke into the room instead of up the chimney.
Walk us through the furniture plan and the doors you use. We look at the wall you prefer and at one or two alternatives. If your first choice fights the airflow in the house, we say so and explain what the difference means for everyday use.
Signs a factory-built unit has reached its end
Warped or burned-through firebox metal, rust holes in the outer casing and chimney sections that have separated all point to a unit near the end. So does a model whose maker no longer supplies refractory or chimney parts. Operating a damaged unit is something the manuals prohibit.
Tell us what you have seen and how the fireplace has behaved. We confirm the condition during the free inspection and explain which findings are cosmetic and which affect safety. The decision to replace comes from those findings, not from the age of the unit alone.
Keep the space in front of the fire clear
Manuals set a clear space in front of and beside the opening where furniture, curtains and stored items should not sit. Nothing combustible belongs on the hearth extension. The distances are printed for each model, and they apply whenever the fire burns.
We point out the clear space at handover so you can arrange the room around it. A stack of firewood beside the hearth may look inviting, but it belongs outside that zone. Rugs and cushions near the opening deserve the same thought.
Handling ashes from the new fireplace
Ashes can hold live embers long after a fire looks dead. Manuals and EPA guidance call for a metal container with a tight lid, placed on a noncombustible surface outdoors and away from anything that can burn. Ashes stay in it until they are fully cold.
We explain ash removal at handover because it is easy to get wrong in the early weeks. Remove ashes only when the fireplace is cold. A cardboard box or a plastic bin is not a safe place for them.
What the free inspection covers for a new fireplace
- Masonry fireplace footing and firebox plan
- Chase framing for an exterior chimney
- Exhaust fans and house pressure review
- Manual, listing label and serial number record
Fireplace installer questions we hear in Riverside Park
Can the old chimney pipe stay when a prefab unit is replaced?
Usually not. The new fireplace is listed with its own chimney, and mixing it with pipe from another system breaks that listing. We check the old pipe's markings and the new manual, and explain the rare cases where the maker allows reuse.
Will the building official need to see the work?
That depends on the job and the jurisdiction. Fireplace manuals tell owners to ask local building or fire officials about inspections before work begins. We explain what may apply to your project and keep walls open until any required check is done.
What happens to the roof opening at the end of each day?
Any open roof penetration is covered at the end of every work day until the chimney is sealed. Debris is gathered daily and taken away with us once the job is complete. Tell us about anything else on the roof we should protect.
More Ways to Care for Your Fireplace
- Fireplace RestorationCoordinate fireplace repairs while preserving suitable existing features and defining the intended use.
- Chimney Flue RepairAssess repairs to damaged existing flue linings and distinguish them from a new liner installation.
- Top-Sealing Damper InstallationFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
- Chimney WaterproofingTreat suitable chimney masonry after checking the surface, repair needs and product requirements.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo