Restoring the firebox, damper and face in Bal Harbour
We plan the whole fireplace at once, so each repair supports the next and the look stays true.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs a fireplace needs restoring
- Fireplace unused for many years
- Open joints on the firebox walls
- Patches in mismatched mortar
- Firebox floor worn or broken
Jump to
Fireplace restoration in Bal Harbour, planned as one job
Matching replacement firebrick
Firebrick comes in several sizes, colors and densities. A replacement that is the wrong size leaves wide joints, and one that is the wrong color stands out once the fire darkens the rest.
We measure the existing units and choose replacements that fit the pattern. Where an exact color match is not available, we place new units where they show least and tell you in advance. After a few fires, new and old firebrick usually darken toward the same tone.
Cracks in the hearth
The hearth in front of the fireplace catches sparks, embers and dropped logs. Over time it can crack, lose grout or develop loose units.
We check whether the cracks are on the surface or run through the hearth. Surface cracks and open joints can be repaired and refilled. A crack that runs through, or a hearth that rocks, points to a support problem. We explain which applies and list the repair separately. Repairs are matched to the hearth material, whether brick, stone, tile or concrete, so the surface reads as one piece once the work is done.
A discontinued factory-built model
Parts for a factory-built fireplace that has gone out of production can be scarce. Scarcity still does not turn an unlisted part into an acceptable one.
We search the manufacturer's parts information for approved alternatives. If none exist, we explain the options openly, including the point at which restoring the unit stops making sense. We do not adapt a listed fireplace to take parts it was not tested with. You decide the next step with the facts in front of you. Sometimes a unit is worth keeping as a decorative piece, and we explain what that would mean for its use.
Rainwater that collects in the firebox
Water in the firebox, rust on the grate or a damp smell after rain usually means water is coming in from above. The fireplace is where it collects, not where it starts.
We look over the firebox for damage from the water and record the likely point of entry. The source, often at the top of the chimney, is a separate repair. Restoring the firebox without stopping the water would let the new work fail. We explain both parts so you can plan them in the right order.
What goes on a brick fireplace estimate
- Firebox joints refilled with refractory mortar
- Face joints repointed with matched mortar
- Model and serial number lookup
- Mortar cure instructions before use
Common fireplace restoration questions
Will the new mortar match the old joints on the face?
We aim to match color, texture and joint shape. Face joints are repointed with a mortar no harder than the brick, following preservation guidance. The match is checked on a small area before the whole face is done.
Do you replace every firebrick during a restoration?
No. Sound firebrick stays. We replace units that are loose, broken or badly eroded, and refill open joints with a heat-rated mortar. The estimate shows which units are to be replaced and where they sit.
What if parts for my factory-built unit are discontinued?
We check for manufacturer-approved alternatives. If none exist, we explain what that means for the fireplace. Unlisted parts are not fitted, because the listing depends on the tested components working together.
More Ways to Care for Your Fireplace
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
- Gas Fireplace Repair and ServiceGet a model-specific gas fireplace service plan for the fault you are seeing or the maintenance your unit needs.
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo