
Fireplace restoration for homes in Croissant Park
We keep what is sound, repair what is worn and replace only what has failed.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
What a neglected brick fireplace shows
- Loose or missing firebrick
- Open joints on the firebox walls
- Damper that no longer moves
- Rust on the lintel or firebox metal
Jump to
Fireplace refurbishing, item by item
One plan for a neglected fireplace
Restoration returns a neglected fireplace to safe use and to the look it was built with, under a single plan. It is the right approach when several parts need attention at once. Treating them one by one, months apart, often means later work damages earlier work.
We look at every part together, from the firebox and damper up to the smoke chamber, and down to the hearth and face. The plan then sets an order and a price for each item. You can approve all of it or part of it. Either way, each repair is chosen to fit the ones around it.
The grate and where it sits
A grate lifts the burning wood clear of the firebox floor so air can feed the fire from underneath. A grate that is too large pushes the fire against the back wall. One that is too small leaves wood falling onto the floor.
We check the grate for size, condition and placement. A burned-out grate can be replaced with one that suits the firebox. For a factory-built unit, the grate must be the one its manufacturer specifies, since the listing covers it. The grate is a small line on the estimate, but it protects the repaired firebox.
Mortar no harder than the brick
Repointing mortar should be softer and more permeable than the brick around it. Preservation guidance explains why. If the mortar is harder, stress and moisture move into the brick instead, and the brick edges can crack or spall.
We choose a mortar that suits the brick in the face, not the strongest one available. That choice is what lets the face last. If earlier repairs used a hard mortar that is now damaging the brick, we explain the problem and whether those joints should be redone.
Protecting the room during restoration
Restoration involves cleaning, cutting out old mortar and setting new materials, so dust and debris are part of the job. The room around the fireplace needs protecting throughout.
We cover the hearth, the floor and nearby furniture before starting and manage dust at the opening as we work. At the end of each day, the area is tidied and debris is bagged. When the job is done, debris is hauled away, and the room is left clean around a restored fireplace.
Line items for an old fireplace
- Surround tiles reset or matched
- Loose stones reset on a stone face
- Clearance to nearby trim checked
- Grate size and position checked
Common fireplace restoration questions
Is there a discount on fireplace restoration work?
Yes. Restoration items booked inside 72 hours of your free inspection come with a 10% discount. The inspection and the written estimate stay free whether or not you go ahead.
Can a restoration be done in stages?
Yes. Essential safety repairs can go ahead before finish work. Each stage is priced separately, and we explain which items must happen before the fireplace is used and which can wait.
Will restoring the fireplace fix a smoky fire?
It may, when the cause sits inside the fireplace. A damper stuck partway and a rough smoke chamber are common examples. We check those first and explain any cause outside the fireplace separately.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo