
Old fireplace restoration with a clear plan in Port Royale
A long-idle fireplace gets a full look before any fire, then a plan to make it usable again.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs a fireplace needs restoring
- Rust on the lintel or firebox metal
- Crumbling joints in the face brick
- Firebox floor worn or broken
- Several small faults at once
Jump to
Old fireplace restoration, step by step
A leaning or bulging firebox back wall
The back wall of the firebox takes the most heat. Over time it can loosen, lean forward or bulge as its joints fail. A back wall that has moved no longer shields the masonry behind it properly.
We check how far the wall has moved and whether the bricks behind the lining are sound. A small area can often be reset. A wall that has come away in a larger section may need to be relaid. The estimate explains which applies and what it means for the time the fireplace is out of use.
The floor of the firebox
The floor of the firebox carries the fire, the grate and the ash. It wears unevenly, cracks and sometimes loses units near the front edge where tools strike it.
We check the floor for loose, broken or sunken units and for gaps along the walls. Damaged units are replaced and set in heat-rated mortar. If the floor has settled, we look for the cause below it before resetting the surface. The floor is listed separately from the walls, so you can see its own scope.
The grate and where it sits
A grate lifts the burning wood clear of the firebox floor so air can feed the fire from underneath. A grate that is too large pushes the fire against the back wall. One that is too small leaves wood falling onto the floor.
We check the grate for size, condition and placement. A burned-out grate can be replaced with one that suits the firebox. For a factory-built unit, the grate must be the one its manufacturer specifies, since the listing covers it. The grate is a small line on the estimate, but it protects the repaired firebox.
A discount for a restoration of any size
A 10% discount applies to restoration work you approve within 72 hours of your free inspection. Firebox repairs, damper work, face cleaning and repointing all count toward it.
If you plan the restoration in stages, the discount covers what you book in that window. Stages you book after the window are priced without it. The inspection and the written estimate are free either way, and every price is set out before any work begins. Ask us at the inspection how the window would apply to your plan, and we explain it plainly.
Line items for an old fireplace
- Surround tiles reset or matched
- Damaged face brick replaced with matches
- Retained features listed on the estimate
- Separate notes on chimney-side findings
Brick fireplace restoration questions
Will you keep the original look of my fireplace?
That is the aim. We keep sound features, match replacement brick, tile and mortar as closely as available materials allow, and tell you where an exact match is not possible before the work starts.
Is there a discount on fireplace restoration work?
Yes. Restoration items booked inside 72 hours of your free inspection come with a 10% discount. The inspection and the written estimate stay free whether or not you go ahead.
Can a restoration be done in stages?
Yes. Essential safety repairs can go ahead before finish work. Each stage is priced separately, and we explain which items must happen before the fireplace is used and which can wait.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo