
Fireplace restoration, firebox to face, for Progresso Village homes
A fireplace restoration in Progresso Village starts with a free inspection and a written plan you can read.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs of wear in an old fireplace in Progresso Village
- Rough stepped masonry above the throat
- Debris or nesting in the firebox
- Loose stones on a stone face
- Several small faults at once
Jump to
What restoring a fireplace involves
One plan for a neglected fireplace
Restoration returns a neglected fireplace to safe use and to the look it was built with, under a single plan. It is the right approach when several parts need attention at once. Treating them one by one, months apart, often means later work damages earlier work.
We look at every part together, from the firebox and damper up to the smoke chamber, and down to the hearth and face. The plan then sets an order and a price for each item. You can approve all of it or part of it. Either way, each repair is chosen to fit the ones around it.
Support beneath a sunken or tilted hearth
The building code asks that a masonry hearth and its extension be concrete or masonry, supported by noncombustible materials. On an old fireplace, that support is rarely visible from the room.
If the hearth has sunk, tilted or cracked right through, we look at what lies beneath it where we can reach. Resetting the surface without fixing the support would not last. We explain what we can see, what we cannot, and whether the hearth needs more than a surface repair.
Working around the mantel you already have
Most restorations leave the existing mantel exactly where it is. The work around it is planned so the mantel is protected during cleaning and repointing.
We cover the mantel and its finish before any cleaning starts. If the mantel is loose or sits closer to the opening than the code allows, we tell you. Changing or replacing it is outside our services. Our job is to restore the fireplace beneath it and keep the mantel as it was. Any concern about it is written on the estimate, so you can decide how to handle it.
Small fires to cure new work
Some heat-resistant fireplace mortars finish curing with heat. One maker calls for air drying first, then a low fire, before the fireplace is used at full strength.
We give you the curing steps for the products we used. Following them lets the new joints harden properly. Skipping them risks cracks in fresh work. If you are unsure about any step, ask us before lighting the fire rather than after. We would rather explain twice than repair the same joint again.
Inside a fireplace restoration estimate
- Smoke shelf cleared of debris
- Face brick cleaned by the gentlest method
- Model and serial number lookup
- Mortar cure instructions before use
What people ask about restoring a fireplace
Do you replace every firebrick during a restoration?
No. Sound firebrick stays. We replace units that are loose, broken or badly eroded, and refill open joints with a heat-rated mortar. The estimate shows which units are to be replaced and where they sit.
Is restoration worth it if I will rarely light a fire?
If you will light it at all, the parts that keep a fire safe still need to work. If you will not burn in it, tell us, and we explain which items still matter for a fireplace that stays closed.
Will restoring the fireplace fix a smoky fire?
It may, when the cause sits inside the fireplace. A damper stuck partway and a rough smoke chamber are common examples. We check those first and explain any cause outside the fireplace separately.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo
