
Brick fireplace restoration, planned as one job, in Riverland
A fireplace restoration in Riverland starts with a free inspection and a written plan you can read.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When an old fireplace needs more than one repair
- Open joints on the firebox walls
- Rough stepped masonry above the throat
- Loose stones on a stone face
- Firebox floor worn or broken
Jump to
Fireplace refurbishing, item by item
Raised hearths
Some fireplaces sit on a raised hearth, a platform in front of the opening. Its edges take knocks from feet and furniture, and its top takes heat from the fire.
We check the top surface, the edges and the joints where the raised hearth meets the face. Loose units are reset, chipped edges are repaired or replaced, and open joints are refilled. If the platform itself has moved, we explain the cause before proposing a repair. Replacement units are matched to the existing ones so the platform still reads as one surface.
High water pressure indoors
High water pressure can drive water deep into masonry, erode joints and scar soft brick. Indoors, it can also send water into walls, floors and the room below.
We do not pressure wash a fireplace face indoors. Cleaning is done by hand, with controlled amounts of water and careful protection of the floor and walls. Where more water is needed, it is managed so it does not soak into the masonry or the room. The slower method protects the brick and the house.
Small items on the inspection visit
Some small items can be done on the inspection visit if you approve them there. Clearing debris from the smoke shelf or freeing a stiff damper are examples.
We only do that work with your agreement and at the price on the estimate. Larger items, those that need matched materials or curing time, are scheduled separately. If you prefer to see the full estimate before anything is done, that is fine. Nothing is started without a clear yes. Either way, the price and the scope are the ones you saw on paper.
Smoke and carbon monoxide alarms near the fireplace
If a carbon monoxide or smoke alarm sounds while the fireplace is lit, get everyone outside at once. From outside, call 911, and stay out until responders tell you the house is safe.
Working alarms are part of using any wood fireplace. Consumer safety guidance recommends alarms for carbon monoxide in the home, tested regularly, and quick action whenever one goes off. Check that your alarms work before you bring a restored fireplace back into use, and do not light a fire if they are missing.
Line items for an old fireplace
- Condition review of every fireplace part
- Clearance to nearby trim checked
- Separate notes on chimney-side findings
- Written record of the restoration work
Questions before restoring a fireplace
Can you restore a stone fireplace face?
Yes. Loose stones are reset and open joints are repointed with a mortar suited to the stone. If a stone is broken, we look for a match and explain the options before replacing it.
Do I need to empty the room for restoration work?
No. Clear the area in front of the fireplace and move fragile items nearby. We cover the hearth and floor, manage dust at the opening and haul debris away when each stage is done.
What should I mention when I call about restoration?
Tell us how long the fireplace has been idle, how you want to use it and what you want to keep. Mention past repairs if you know of any, and whether the fireplace is masonry or factory-built.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo

