Planning and installing a gas fireplace in Homestead Base
We install the appliance you approve, test it, and show you how it should run.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Situations that lead to a new gas unit
- Propane supply but no appliance yet
- An existing vent of unknown make
- A particular look chosen for the wall
- No manual for the existing unit
Jump to
Planning a gas fireplace installation step by step
Where a direct-vent unit gets its air
A direct-vent gas fireplace is sealed from the room. It draws combustion air from outside and sends combustion products back out through the same vent assembly, usually one pipe inside another. The glass front stays closed during operation.
That design gives more freedom over position, because the vent can end on a wall or a roof rather than needing a chimney. The freedom has limits, though. The manual sets the allowed vent lengths, elbows and termination clearances, and we plan the route within those limits before cutting anything.
Controls, remotes and ignition options
Gas fireplaces offer different ignition systems and controls, from standing pilots to on-demand pilots with remotes, thermostats and timers. The model decides which options are available, and some need household power or batteries.
We explain the control options for the models you are considering and what each needs from the house. If you want a wall switch or a remote in a particular place, we plan the wiring route with the manual in mind. Controls are chosen from the maker's own list for the model, not from general accessories.
Inserts and log sets have their own services
A gas insert slides into an existing fireplace and vents through liners, and a gas log set sits in a working wood fireplace. Both are gas appliances, but their planning, venting and requirements differ from a built-in gas fireplace.
We handle inserts and log sets under their own installation services. If your plan involves an existing fireplace opening, tell us, and we start with the service that fits. This installation service is for new vented gas fireplaces framed into a wall, a chase or a new opening.
Keeping a new appliance dry and complete
Manuals ask for the appliance to be kept dry before and during installation, and they warn against installing damaged, incomplete or substitute components. A unit that has been under water must not be used until its control parts have been inspected and replaced.
We store and protect the appliance on site so rain, construction water and dust do not reach it. Every part in the box is checked against the packing list. If something is missing, the installation waits for the listed part rather than using a stand-in from another product.
The installation checklist for your gas unit
- Room and appliance position review
- Clearances to combustibles marked out
- Flashing and storm collar on roof terminations
- Written record of the installation
Before you plan a gas fireplace
Where can the vent termination go on an outside wall?
Only where the manual's clearance rules allow it, measured from openable windows and doors, soffits, corners, meters, decks and walkways. We mark the position during the project inspection, before any opening is cut.
Can you install a propane fireplace?
Yes, where the model is supplied for propane or converted as its manual allows. Your propane supplier or a gas contractor handles the tank, regulator and piping. We confirm the fuel on the rating plate before the unit is set in place.
Can a gas fireplace be added to a room with no fireplace?
Often, if a permitted vent route and a suitable framed enclosure can be created. The project inspection tells you whether your chosen position works and what construction it needs before anything is ordered.
More Ways to Care for Your Fireplace
- Wood-Burning Fireplace Insert InstallationFit a wood-burning insert after assessing its host fireplace and full connection requirements.
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
- Spalling Brick Repair and Chimney Brick ReplacementReplace deteriorated chimney bricks while retaining suitable surrounding masonry.
- Firebox RepairRepair the damaged fireplace chamber using an approach suited to masonry or manufactured components.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo