New vented gas fireplaces installed in Shady Banks
Choose the appliance with its vent route and room in view, not from a picture alone.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Situations that lead to a new gas unit
- A unit bought before the route was checked
- A builder asking for framing details
- A particular look chosen for the wall
- An old decorative unit that gives little heat
Jump to
Choosing, framing and venting a gas unit
Combustion air for units that use room air
A natural-draft gas fireplace burns air from the room it sits in. The fuel gas code sets methods for providing enough combustion, ventilation and dilution air, either from inside the building or brought in from outdoors. Direct-vent units follow their manuals instead, because they draw air from outside.
For natural-draft models, we look at the room and the connected spaces during the project inspection. If the room does not meet the code's indoor air method, outdoor air may be needed. We explain what that means for your plan before the model is ordered.
Drawings, builders and other trades
Gas fireplace projects often involve a builder, an electrician, a gas contractor and a finish trade. Each needs the manual's requirements that affect their work, such as framing sizes, clearances, noncombustible zones and supply positions.
Bring any drawings you have to the project inspection. We mark up the requirements for the chosen model and share them with the other trades before they start. When everyone works from the same manual, the finished opening fits the appliance and the appliance fits its listing.
Keeping the hot front out of traffic
A gas fireplace front and its glass heat up whenever the fire runs. One manual asks for the appliance to be located out of traffic and away from furniture and draperies. Another notes that termination caps outside are also hot and should be kept clear of walkways and gathering spots.
We raise these points during planning, when moving the unit along a wall is still easy. A position that works for the view but sits in a walkway may need rethinking. Seating, curtains and doors that swing near the front are part of the conversation.
Questions to settle before ordering
Before a gas fireplace is ordered, several points should be settled. They include the fuel, whether the unit is decorative or heater-rated, and where the vent will end. They also include who installs the supply and power, and whether the manual allows the planned finish.
We work through those questions with you during planning and record the answers in the scope. If one of them cannot be answered yet, ordering waits. Settling them early avoids the costly surprises that come from buying first and planning second.
The installation checklist for your gas unit
- Framing and chase layout to the manual
- Noncombustible zones kept free of combustibles
- Glass, barrier and trim fitted
- Debris cleaned up and hauled away
Gas fireplace installs, questions answered
Does a direct-vent unit need a chimney?
No. A direct-vent gas fireplace uses a sealed vent system that draws outside air and exhausts through a listed termination on a wall or roof. The route and termination must fit the manual's rules for that model.
What does the free project inspection cover?
We look at the room, the intended position, possible vent routes, the framing and access, and the fuel supply situation. You then receive a written scope that separates our work from the work of other trades.
Should the fireplace go in before or after the finish work?
The appliance, framing and vent come first, and the finish follows to the manual's requirements. Some models allow certain finish materials only in set zones. We agree the sequence with your builder so nothing has to be undone.
More Ways to Care for Your Fireplace
- Chimney Animal RemovalAssess occupied chimney openings and plan appropriate follow-up cleaning or entry protection.
- Ventless Gas Fireplace ServiceService the identified vent-free appliance without bypassing its required safety components.
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Chimney WaterproofingTreat suitable chimney masonry after checking the surface, repair needs and product requirements.
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo