Direct-vent and B-vent gas fireplace installation in Shorecrest
Book the approved installation within 72 hours of your free inspection and save 10%.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Projects that start with a gas fireplace plan
- Parts no longer made for the existing unit
- A builder asking for framing details
- A new deck crowding the old termination
- No manual for the existing unit
Jump to
New gas fireplaces for homes in Shorecrest
Noncombustible zones around the opening
Gas fireplace manuals define which materials count as noncombustible and where combustible materials may and may not be placed. Some zones close to the opening must stay free of combustible materials, including wood trim and some wall boards.
We mark those zones for your builder and finish trade before the wall is covered. After the finish goes on, we check that nothing combustible has been placed in a restricted area. A small detail, such as wood trim run too close to the opening, can take the installation outside its listing.
Clearances to combustibles inside the framing
Inside the wall or chase, the appliance and its vent need specified air spaces to framing and other combustibles. The manual gives the figures for each model and warns that insulation and other materials must be secured so they cannot drift into those spaces.
We frame, or check the framing, against those clearances before insulation goes in. Spacers, standoffs and shields supplied with the appliance are fitted as shown. Once the wall is closed, those spaces cannot be seen, which is why they are checked and noted on your written record beforehand.
Assembling and locking the vent joints
Direct-vent and Type B vent systems join sections with twist-lock or push-lock joints designed for that system. Each joint has to be fully engaged, and some systems call for sealant or a screw at specific points only.
We assemble the vent from the appliance outward, lock each joint as the instructions describe and support the run at the intervals they give. Joints hidden in walls are checked before the walls close, because the manuals do not require inspection openings at each joint. The final assembly is recorded with the parts list.
Glass, barrier screen and front at handover
The glass assembly, barrier screen and decorative front are fitted last, after the media is placed and the first checks are done. The barrier screen supplied with the unit is part of the appliance, and manuals say the fireplace should not run without it.
We fit each part as the manual shows, check the latches and confirm the barrier sits securely. The glass is cleaned of handling marks. If a part arrived damaged or does not fit as it should, the unit waits for the listed replacement rather than being handed over incomplete.
Gas fireplace installation items for Shorecrest homes
- Listing and manual confirmed for the model
- Electrical requirement noted for an electrician
- Written record of the installation
- Finish work boundaries shown on the estimate
Questions about installing a gas fireplace
Can the fireplace go on an interior wall?
Sometimes. The vent route has to reach a permitted termination within the vent tables for the model. Longer routes and extra elbows can rule some positions out, so we check the route before you commit to that wall.
Is a decorative gas fireplace different from a heater-rated one?
Yes. Vented decorative fireplaces are listed to ANSI Z21.50, while vented fireplace heaters are listed to ANSI Z21.88. If warmth matters as much as the look, we point you toward heater-rated models during selection.
Can a gas fireplace be added to a room with no fireplace?
Often, if a permitted vent route and a suitable framed enclosure can be created. The project inspection tells you whether your chosen position works and what construction it needs before anything is ordered.
More Ways to Care for Your Fireplace
- Chimney Leak RepairFind the chimney water entry point and plan a repair before restoring the damaged finish.
- Chimney Animal RemovalAssess occupied chimney openings and plan appropriate follow-up cleaning or entry protection.
- Gas Fireplace Repair and ServiceGet a model-specific gas fireplace service plan for the fault you are seeing or the maintenance your unit needs.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo