A new gas fireplace in Wilton Manors, installed to its manual
We install the appliance you approve, test it, and show you how it should run.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When a gas fireplace installation makes sense
- Rust holes in the old firebox
- Unsure where a vent could exit
- An old decorative unit that gives little heat
- Controls you would like to update
Jump to
Installing vented gas fireplaces in Wilton Manors
Keeping the hot front out of traffic
A gas fireplace front and its glass heat up whenever the fire runs. One manual asks for the appliance to be located out of traffic and away from furniture and draperies. Another notes that termination caps outside are also hot and should be kept clear of walkways and gathering spots.
We raise these points during planning, when moving the unit along a wall is still easy. A position that works for the view but sits in a walkway may need rethinking. Seating, curtains and doors that swing near the front are part of the conversation.
Mantels and wall projections above the unit
Manuals for built-in gas fireplaces set rules for mantels and other projections above and beside the opening. The rules depend on the material and on how far the projection stands out. Combustible and painted surfaces are treated differently from noncombustible ones.
If you plan a mantel, shelf or projecting surround, share the design before it is built. We compare it with the manual's figures for the chosen model and explain what fits. Mantel work is not part of our service, but we check that the finished detail matches the appliance's requirements before the unit is commissioned.
Vent parts from one listed system
Direct-vent systems are tested as complete assemblies with their own pipe, elbows, joints and terminations. The manuals warn against mixing pipe, fittings or joining methods from different manufacturers, even when sizes appear to match.
We order every vent part from the system the manual lists for your model, including firestops, shields and the termination. If a part is unavailable, we wait for the listed part or choose another listed system, rather than filling the gap with a similar-looking piece. The parts list goes into your written record.
Approving the plan before ordering
Before any appliance or vent parts are ordered, you approve the plan. It shows the chosen model, the position, the vent route and termination, the framing approach, the accessories and the items other trades will carry.
Approval is in writing and matches the estimate. If anything in the plan is unclear, ask before you approve. Ordering starts only after that, because many parts are model-specific and changing course after ordering can mean returns, delays and a revised design. If you want time to think it over, the plan waits for you.
What a gas fireplace project in Wilton Manors includes
- Room and appliance position review
- Control and service access planned
- Appliance set, leveled and secured
- Vent assembled with every joint locked
New gas unit questions for Wilton Manors homes
Can the new vent run through a closet or storage space?
It can, where the route allows. The vent is enclosed and the enclosure blocked as the manual describes, so stored items and insulation cannot reach the pipe. We explain what should be kept clear of that enclosure once the job is finished.
Can you replace my old gas fireplace with a new model?
Yes, as a planned installation. The new model's requirements are checked against the existing framing, vent and supply. Old vent parts stay only where the new manual lists them for that appliance.
Can a gas fireplace be added to a room with no fireplace?
Often, if a permitted vent route and a suitable framed enclosure can be created. The project inspection tells you whether your chosen position works and what construction it needs before anything is ordered.
More Ways to Care for Your Fireplace
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
- Chimney TuckpointingRenew deteriorated mortar joints around chimney bricks that can appropriately remain.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Chimney Flue RepairAssess repairs to damaged existing flue linings and distinguish them from a new liner installation.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo