Gas fireplace venting for homes in Flagler Village
Vent repairs approved in the 72 hours after your free inspection are priced at 10% off.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Gas venting faults we are asked about
- A new deck built close to the vent
- Vent pipe loose where it meets the wall
- Fire behaves oddly when fans run
- A porch enclosed around the termination
Jump to
Vent work for gas fireplaces in Flagler Village
Clearances around a direct-vent wall termination
Through-the-wall terminations have their own clearance table in the fuel gas code, which separates direct-vent terminals from others. Appliance manuals add their own figures for features such as soffits, inside corners, meters and walkways.
We measure an existing wall termination against both and use the stricter figure where they differ. The results are written on your record. If a clearance is not met, we explain which feature is too close and whether the termination, or the feature, is the more practical thing to move.
Working on a vent from the roof
Roof terminations are checked and repaired from the roof where access is safe. Steep, fragile or wet roofs may limit what can be done on a given day. We tell you in advance if the roof itself limits access.
On the roof we look at the cap, storm collar, sealant, flashing and the height of the termination. Repairs to vent parts are carried out with care for the roof covering. Where the covering itself is damaged, we describe it and suggest a roofer, rather than disturbing a roof we are not responsible for.
The connection at the appliance collar
The first joint in the vent is at the appliance collar, where the vent attaches to the fireplace. It is often hidden behind the unit or its surround, and reaching it can mean sliding the appliance forward or removing panels.
We check the collar connection where access allows, looking at how the vent attaches and seals as the manual shows. If the collar joint cannot be reached without moving the appliance, we explain what that involves before doing it. Faults at the collar are repaired with the listed adapter or starter section.
Vents passing through upper floors
A vent that rises through upper floors passes through ceilings and floors that each need a firestop, and it may run through closets or chases on the way. Each crossing is a place where clearances can be lost during later work.
We follow the route floor by floor where access allows and check each crossing for its firestop and clearance. Where the vent runs inside a chase, we look at how the chase is blocked. Crossings we cannot reach are noted, and access to them is offered as a separate item.
What your gas vent estimate covers
- Appliance and vent system identification
- Vent maker and system read from labels
- Route traced from collar to termination
- Separate vent confirmed for the appliance
Questions on gas vents, answered for Flagler Village
What is a draft check on a natural-draft fireplace?
After warm-up, a test at the draft hood relief opening shows which way the exhaust is moving, up the vent or back out into the room. We carry it out during vent work on draft-hood appliances.
What records do I get after vent work?
A written record of the work that lists the appliance, the vent maker and system, and the route. It also covers the parts replaced, the checks made and anything that stayed concealed or outside the scope.
Is vent repair part of a gas fireplace service visit?
No. A service visit includes a look at the termination, but repairs to the vent are quoted under this venting service. That keeps appliance work and vent work clearly separated on the estimate.
More Ways to Care for Your Fireplace
- Chimney Sweep and Chimney CleaningArrange careful chimney cleaning in Miami with a defined scope, protected work area and useful findings.
- Chimney Cap Installation and ReplacementProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
- Top-Sealing Damper InstallationFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
- Chimney TuckpointingRenew deteriorated mortar joints around chimney bricks that can appropriately remain.
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo