Brick, stone and tile hearth repair across Coral Ridge
The hearth in front of your fireplace is repaired as a noncombustible surface that still does its job.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs the hearth needs more than grout
- A tile that sounds hollow underfoot
- Cracks running across several tiles
- Loose stones on a raised hearth
- Grout crumbling near the opening
Jump to
Hearth repair that starts with the cause
The inner hearth and the hearth extension
Brick industry guidance divides the hearth into two parts. The inner hearth sits inside the firebox and forms the floor where the fire burns. The hearth extension runs out into the room beyond the face of the fireplace.
They meet at the opening but are repaired as different jobs. Damage to the floor inside the firebox is firebox work, using firebrick and refractory mortar. Damage to the extension in front is hearth work, using noncombustible finish materials on a sound base. We tell you which part is affected and list each on its own line.
Hollow-sounding tiles across the hearth
Tapping across a tiled hearth tells you a lot. Solid tiles give a dull, firm sound; tiles that have lost their bond sound hollow. Hollow tiles crack more easily and may lift at their edges.
We tap across the whole hearth, not only near the visible damage, and mark any hollow areas. A few loose tiles can be lifted and reset. Widespread hollowness suggests the adhesive or base has failed, and the estimate explains whether a partial or full resurface is the sounder repair.
Why the hearth catches what the screen misses
Manufacturer manuals point out that a fire screen controls sparks but does not stop burning material from falling out. Logs shift, embers pop and pieces roll forward when a fire settles.
The hearth extension is what those pieces land on. A hearth with gaps, loose edges or combustible material laid over it gives them somewhere to go. That is the practical reason we treat hearth damage as a safety question as well as an appearance one. A hearth kept clear of rugs, baskets and kindling gives those pieces nothing to catch.
A hearth by a fireplace you rarely light
A hearth in front of a fireplace that is seldom used still takes feet, furniture and cleaning. Cracks and loose edges develop whether or not a fire is lit.
If you plan to start using the fireplace again, the hearth should be checked against the fireplace it serves before the next fire, not only for looks. Where the fireplace will stay out of use, the repair can focus on a safe, sound floor surface. Tell us which you intend, because the right scope differs between the two. We write down which way the repair was planned, so a later change of mind starts from the facts.
Hearth materials and steps in writing
- Hearth type and finish identified
- Loose units lifted and reset
- Dust kept near the work area
- Written record listing hearth materials
Hearth support, size and finish explained
Why does the crack in my hearth keep coming back?
Something beneath the surface is still moving, whether the bed, the base, the support or the floor around it. A new tile or fresh grout over that movement copies the crack. We look for the cause and explain how it could be confirmed.
Can a hearth be extended without replacing the whole thing?
Usually, yes. The new section needs a base and support of the same kind as the existing hearth, and its finish can match or contrast. The room floor is cut back to make space. The estimate lists the extension, the floor edge and the finish separately.
Do you repair raised hearths as well as flush ones?
Yes. Raised hearths tend to loosen at the edges and corners where people sit and step, while flush ones crack with the floor around them. We check how the top is fixed to the platform and price edge and corner work by section.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo