Fireplace hearth repair and replacement in Golden Heights
Hearth work approved within 72 hours of your free inspection is priced with 10% off.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Hearth problems you can see and feel
- Loose stones on a raised hearth
- Tiles lifting at their corners
- A raised hearth that flexes when sat on
- Loose bricks along the hearth border
Jump to
Hearth Repair for fireplaces in Golden Heights
The inner hearth and the hearth extension
Brick industry guidance divides the hearth into two parts. The inner hearth sits inside the firebox and forms the floor where the fire burns. The hearth extension runs out into the room beyond the face of the fireplace.
They meet at the opening but are repaired as different jobs. Damage to the floor inside the firebox is firebox work, using firebrick and refractory mortar. Damage to the extension in front is hearth work, using noncombustible finish materials on a sound base. We tell you which part is affected and list each on its own line.
A larger opening needs a larger hearth
Under the code, a masonry hearth extension grows with the fireplace opening. Once the opening passes a certain area, the extension has to reach further in front and further to each side.
When an opening was enlarged in an earlier project, the hearth may not have grown with it. We measure the opening and the extension on the visit and tell you whether the two still match. If they do not, extending the hearth goes onto the estimate as a separate, clearly described item.
Flooring installers and the hearth edge
When new flooring goes in around a fireplace, the flooring installer and the hearth meet at the edge. Problems arise when the floor is laid too close to the opening or tucked under the hearth.
If you are planning new flooring, call us before it is laid. We can explain where the hearth edge must stay and whether the hearth needs repair or extension first. Getting the order right avoids cutting back a new floor later to make room for the protected area.
New and old finish side by side
A partial repair places new material next to old. Even a good match can look different at first, as older surfaces carry wear, soot and years of cleaning. Grout color also changes with age, so fresh joints can stand out as much as the tile.
If appearance matters, tell us before the repair. We can suggest where to place the boundary so the difference is less obvious, or price a full resurface for comparison. Either way, you see the options before any material is removed. A modest difference usually fades as the new surface sees use.
What the free hearth inspection looks at
- Hearth type and finish identified
- Base condition beneath the finish
- Sealed joint between the unit and hearth
- Extension added where the hearth falls short
Hearth support, size and finish explained
What materials can a repaired hearth be finished in?
Noncombustible ones such as brick, stone, slate, concrete or tile, on a base suited to the fireplace. A factory-built unit's manual may add requirements for the layers beneath and for a clearly visible edge. Within those rules, the look is your choice.
What if wood was left under my hearth when it was built?
The code says combustible material must not remain against the underside of a hearth. If the signs suggest it, we explain what opening a small section would show and price that step first. Any wood found is removed as part of the repair you approve.
What does the written record say after a hearth repair?
It notes what was replaced on the surface, the work carried out beneath it, the materials used and their source, and any setting time still running. It also lists what we saw but did not touch.
More Ways to Care for Your Fireplace
- Chimney TuckpointingRenew deteriorated mortar joints around chimney bricks that can appropriately remain.
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
- Chimney Liner Installation and ReliningPlan a compatible chimney liner installation with the existing passage, connections and maintenance access considered together.
- Chimney Chase Cover ReplacementReplace the chase top with a properly planned cover and clearly defined pipe connections.
- Fireplace RestorationCoordinate fireplace repairs while preserving suitable existing features and defining the intended use.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo