Cracked hearth and tile repair in Opa-locka
Our workmanship warranty applies to the hearth work we do, and its terms are explained at handover.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Tile, stone and brick hearth warning signs
- The hearth sloping toward the room
- A hearth that looks short for the opening
- White powder on hearth bricks
- Loose bricks along the hearth border
Jump to
The hearth finish, base and support
Getting the hearth ready for our visit
Clear the hearth of plants, baskets, log holders and decorations, and move any rug in front of it. Let the fireplace go cold, ideally with no fire the day before.
Leave loose tiles or pieces where they are, and do not try to lift anything that moves. If you have spare tiles, an old invoice or a manual for a factory-built unit, set them out. They help us match materials and read the construction. Clearing a route through the room lets us lay floor protection before any tools come in.
Hearths trimmed back in an earlier renovation
Earlier renovations sometimes trimmed a hearth to fit a new floor pattern or a narrower room layout. The result can be a hearth that looks tidy but no longer covers the protected area.
We check the hearth against the fireplace it serves and explain whether it has been cut short. Restoring the lost area is a repair we can plan with you, including how it will meet the floor that replaced it. The finding is written down even if you decide to wait.
A hearth carried over a framed floor
If the fireplace stands on an upper floor or over a crawl space, the hearth extension cannot simply rest on wood floor framing. The code asks for noncombustible support, and brick industry guidance shows corbelled brick, a structural slab or a reinforced cantilever carrying it.
That support is usually hidden once the finish is laid. Where a crawl space or a ceiling access gives a view of the underside, we look at it. Where nothing can be seen, we explain what the surface pattern suggests and what opening a section would confirm. You decide whether that step is worth taking.
Looking at the hearth from below
Some hearths can be seen from underneath, through a crawl space, an unfinished ceiling below or an access panel. That view can answer questions the surface cannot, such as how the hearth is carried and whether anything combustible was left against it.
Where such access exists and is safe to use, we ask to look. We note the support type, any cracking on the underside and any wood or form material that should have been removed after construction. Where there is no access, we say so, and the estimate explains what that leaves unknown.
The hearth scope you approve
- Hearth size checked against the opening
- Support type identified where visible
- Sealed joint between the unit and hearth
- Damaged tile, brick or stone replaced
Questions about tile, stone and brick hearths
Why does the crack in my hearth keep coming back?
Something beneath the surface is still moving, whether the bed, the base, the support or the floor around it. A new tile or fresh grout over that movement copies the crack. We look for the cause and explain how it could be confirmed.
What does the written record say after a hearth repair?
It notes what was replaced on the surface, the work carried out beneath it, the materials used and their source, and any setting time still running. It also lists what we saw but did not touch.
What does the workmanship warranty cover on hearth work?
It covers the hearth repair we carried out, meaning the surface we laid or reset and the base work we did. Parts of the hearth or floor we did not touch fall outside it, and we explain the terms when the job is finished.
More Ways to Care for Your Fireplace
- Spalling Brick Repair and Chimney Brick ReplacementReplace deteriorated chimney bricks while retaining suitable surrounding masonry.
- Chimney Chase Cover ReplacementReplace the chase top with a properly planned cover and clearly defined pipe connections.
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
- Chimney Cap Installation and ReplacementProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo