Brick, stone and tile hearth repair across Rock Island
The hearth in front of your fireplace is repaired as a noncombustible surface that still does its job.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Hearth cracks and loose pieces to mention
- A tile that sounds hollow underfoot
- The hearth sloping toward the room
- Flooring tucked under the hearth edge
- A hearth that looks short for the opening
Jump to
The hearth finish, base and support
Protective metal hearth strips
Some factory-built fireplaces require metal hearth strips at the front edge of the unit, where it meets the hearth extension. The manual treats them as mandatory, because they stop sparks and heat reaching concealed combustibles at that joint.
Strips are easily lost or covered during a renovation. We check whether the manual calls for them and whether they are in place. Replacing a missing strip is usually a small item, and it goes on the estimate with the maker's part named where one is specified.
Cantilevered hearths and cracks at the wall line
Some hearth extensions are carried as a cantilever of reinforced brick or concrete, projecting from the fireplace base. A crack across the hearth near the wall line can be a sign the cantilever is under strain. Cantilevers are hidden once the hearth is finished, so the surface is often the only clue.
We look for sag at the front edge, cracks on the underside where visible, and whether the crack is opening. Repairs to a cantilevered support go beyond the surface finish, and we explain what they involve. Surface work waits until the support question is settled.
The inspection discount on hearth work
Approve the hearth lines within 72 hours of your free inspection, and 10% comes off each of them. Those hours run from your own inspection, which leaves time to read the estimate and weigh any matching options.
If you need longer, perhaps to find a spare tile or decide between a patch and a new surface, the estimate still stands at its written price. We would rather the hearth look and work the way you want than have the decision rushed. Ask us to mark which lines the discount would cover if you are approving only part of the work.
What the free inspection covers for a hearth
The free inspection looks at the hearth's size against the opening, its surface, joints, edges and the junction with the firebox. We tap for hollow areas and check for dips and gaps. We also look at the edge where the hearth meets the floor and at anything laid over the extension.
For factory-built units we also check the manual's hearth requirements. We explain the findings before we leave, including what could not be seen. There is no charge and no obligation to book the repair. The free written estimate follows, with each item priced on its own line.
Hearth surface, base and edge on the estimate
- Hearth type and finish identified
- Floor boundary named on the estimate
- Sealed joint between the unit and hearth
- Optional sealing on its own line
What people ask about cracked hearths
What materials can a repaired hearth be finished in?
Noncombustible ones such as brick, stone, slate, concrete or tile, on a base suited to the fireplace. A factory-built unit's manual may add requirements for the layers beneath and for a clearly visible edge. Within those rules, the look is your choice.
Do you repair raised hearths as well as flush ones?
Yes. Raised hearths tend to loosen at the edges and corners where people sit and step, while flush ones crack with the floor around them. We check how the top is fixed to the platform and price edge and corner work by section.
What if wood was left under my hearth when it was built?
The code says combustible material must not remain against the underside of a hearth. If the signs suggest it, we explain what opening a small section would show and price that step first. Any wood found is removed as part of the repair you approve.
More Ways to Care for Your Fireplace
- Chimney Sweep and Chimney CleaningArrange careful chimney cleaning in Miami with a defined scope, protected work area and useful findings.
- Ventless Gas Fireplace ServiceService the identified vent-free appliance without bypassing its required safety components.
- Top-Sealing Damper InstallationFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
- Chimney Cap Installation and ReplacementProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo