Hearth and hearth tile repairs in South Miami
Save 10% on hearth work you approve inside 72 hours of the free inspection at your home.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs the hearth needs more than grout
- A tile that sounds hollow underfoot
- A crack back after an earlier repair
- Loose stones on a raised hearth
- Tiles lifting at their corners
Jump to
Hearth finishes in tile, brick and stone
The code's rules for building a masonry hearth
For a masonry fireplace, the Florida Building Code calls for the hearth and hearth extension to be concrete or masonry on noncombustible support. They must also be reinforced to carry their own weight and the loads placed on them. Minimum thicknesses apply to both.
A repair has to keep to those rules. Replacing a broken surface with a thinner one, or resting it on a combustible base, would leave the hearth short of what the code expects. We explain the construction we find and what the repair must preserve, without quoting dimensions until the actual fireplace has been measured.
A hearth as part of a wider restoration
Sometimes the hearth is one of several worn parts: a loose firebox floor, a failing damper and a stained face. Repairing the hearth alone may leave the fireplace still unfit for use.
Each part gets its own finding on paper, which lets you weigh them side by side. When several need attention at once, a fireplace restoration may be the clearer plan. When the hearth is the main problem, a hearth repair on its own makes sense, and we tell you which fits. The written findings keep later decisions grounded in the same facts.
Sealers on stone, slate and tile hearths
Some stone, slate and grout surfaces are sealed to resist stains. A sealer is a product with its own directions, and not every one suits a surface that sits close to heat. A sealer that browns or peels near the opening is a sign it did not.
If a sealer is part of your hearth repair, we name the product and follow its label on where it may go. Where an old sealer has discolored, we explain how it can be removed with the gentlest method that works, tested on a small area first. Sealing is listed as an optional line you can accept or leave.
Keeping track of a hearth crack
If you are not ready to repair a crack, watching it gives useful information. Mark each end lightly with a pencil and note the date. Check it now and then to see whether it has grown or whether one side has dropped.
A crack that stays the same is often a surface matter. A crack that lengthens, widens or steps suggests continuing movement beneath, and that changes the repair. Bring your notes to the visit. They can save an opening step, because they show us the movement we could not watch ourselves.
What a hearth repair estimate lists
- Metal hearth strips where the manual requires
- Damaged tile, brick or stone replaced
- Firebox and surround items listed separately
- Workmanship warranty on the hearth work
Your hearth questions, in plain terms
Will the new tile match the rest of my hearth?
It depends on whether the tile is still made or a spare is stored in the house. Where an exact match is not possible, we show options such as a border, a pattern change or a full resurface, each with its own price.
Can the fireplace be used before the hearth is repaired?
Sometimes. A cracked tile on a sound base rarely stops fires. Missing pieces, loose edges near the opening or gaps into a void below should stop them. We give you a direct answer on the visit and explain the reason.
Will you tell me if my hearth only needs cleaning?
Yes. If the marks are soot or heat staining and the surface is sound, we say so and do not write up a repair. Cleaning can be listed as its own item, using the gentlest method that works, tried on a small area first.
More Ways to Care for Your Fireplace
- Chimney Animal RemovalAssess occupied chimney openings and plan appropriate follow-up cleaning or entry protection.
- Chimney Flue RepairAssess repairs to damaged existing flue linings and distinguish them from a new liner installation.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
- Gas Fireplace InstallationCreate a complete gas fireplace installation plan for the room, appliance and connected systems.
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo