Hearth and hearth tile repairs in Victoria Park
Cracks that return after earlier repairs get a look at the base, not another tile laid over the same fault.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
What a failing hearth looks like
- A tile that sounds hollow underfoot
- Grout crumbling near the opening
- Flooring tucked under the hearth edge
- A dark joint that stays damp
Jump to
Repairing, extending or replacing a hearth
The screen and the hearth work as a pair
A screen that closes across the opening keeps most sparks on the firebox side. The hearth takes whatever gets past. If one is failing, the other has more to do.
During a hearth visit we check that the screen closes fully and sits on the hearth without gaps. A torn or sagging screen is noted even though it is not hearth work. Keeping both in order reduces the marks and wear on the repaired hearth afterwards. A screen that leaves a gap at the base lets embers straight onto the hearth edge.
New flooring and the hearth's height
A new floor that is thicker than the old one changes the height relationship between the room and the hearth. A flush hearth can end up sitting below the floor, and a raised one can look lower than intended.
For a masonry fireplace with a raised firebox, the height of the opening above the hearth also matters to the code's thinner-hearth allowance. We check the fireplace as it will stand after the new floor, not only as it stands today, and explain any change needed.
Building out a hearth that is too short
Where a hearth extension is too small for its fireplace, extending it adds noncombustible floor where the rules call for it. The new section needs the same kind of base and support as the rest.
We plan how the extension will join the existing hearth and how its finish will match or contrast. We also plan how the room floor will be cut back and finished at the new edge. The estimate shows the extension, the floor edge work and any finish choices as separate lines.
Marble hearths and their weaknesses
Marble is noncombustible and often used for hearths, but it is softer than many stones and conducts heat readily. It can scratch, stain and crack under point loads or an uneven bed.
We check whether a marble hearth rests evenly and whether cracks are stable. Replacing a marble piece means finding a match in color and veining, which can take time. For a factory-built fireplace, we also confirm that the layers beneath the marble meet the manual. Heavy items are best kept off a marble hearth once it has been repaired.
Hearth work written up line by line
- Grout and mortar joints checked
- Metal hearth strips where the manual requires
- Setting material named for the finish
- Optional sealing on its own line
Common questions about hearth extensions
Why does the crack in my hearth keep coming back?
Something beneath the surface is still moving, whether the bed, the base, the support or the floor around it. A new tile or fresh grout over that movement copies the crack. We look for the cause and explain how it could be confirmed.
What materials can a repaired hearth be finished in?
Noncombustible ones such as brick, stone, slate, concrete or tile, on a base suited to the fireplace. A factory-built unit's manual may add requirements for the layers beneath and for a clearly visible edge. Within those rules, the look is your choice.
Is it safe to sit on a raised hearth?
A sound raised hearth is built to carry its own weight and the loads placed on it, including people sitting on the edge. Loose capstones or corners are a different matter. Keep off loose sections until they are reset, and mention them when you book.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo