Loose and cracked hearths repaired in West Flagler
The hearth in front of your fireplace is repaired as a noncombustible surface that still does its job.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Tile, stone and brick hearth warning signs
- A crack back after an earlier repair
- Scorch marks reaching the floor beyond
- A raised hearth that flexes when sat on
- Rug or laminate covering part of the hearth
Jump to
The hearth finish, base and support
Insulation beneath some factory-built hearths
Some factory-built fireplace manuals call for a hearth extension with a stated insulating value, not only a noncombustible surface. The manual lists materials and thicknesses that meet it, often a specific board under the finish.
When such a hearth is repaired, the insulating layer has to be kept or restored, not just the tile on top. We check what the manual requires and what is actually there. If the base does not match, we explain the gap and price the correction as its own line.
Workmanship warranty on the hearth repair
Our workmanship warranty covers the hearth repair we carry out: the surface we laid or reset and the base work we did. It does not stretch to parts of the hearth or floor we did not touch, or to damage from heavy impacts afterwards.
We explain those terms when the job is done. Where the repair left an older section in place by agreement, the record says so, which keeps any later question simple to answer. File the written record of the work beside the fireplace manual, and the covered work stays easy to point to.
The first fires after a hearth repair
Once the setting time has passed, start with a modest fire and keep the screen closed. Watch the repaired area during the first few fires for any movement or cracking.
Fresh grout and mortar near the opening take the most heat, and small changes are easier to deal with early. If something looks wrong, stop and tell us. The workmanship warranty covers the repair, and we would rather check a small concern than leave it to grow. Grout near the opening may darken quickly, which is normal and not a sign of failure.
Paint and coatings on a brick hearth
A painted brick hearth can hide cracked units and open joints. Paint near the opening may also blister or peel with heat. Removing paint from brick takes care, because harsh stripping can scar the faces.
Brick industry guidance on cleaning favors the gentlest effective method, tried on a small area before the whole surface. If you want paint removed as part of a hearth repair, it appears as its own line with the method named. If you would rather keep a painted finish, we repair the brick and joints beneath and explain what the coating may do near the fire.
Hearth repair lines you can approve separately
- Hearth type and finish identified
- Base condition beneath the finish
- Combustible material under the hearth checked
- Setting times before weight and fires
Your hearth questions, in plain terms
Is my hearth big enough for the fireplace?
That depends on the fireplace. A masonry fireplace follows the code's rules for the extension, which grow with the size of the opening. A factory-built unit follows its own manual. We measure both on the visit and tell you plainly whether the hearth falls short.
What should I move off the hearth before the visit?
Plants, baskets, log holders, decorations and any rug in front of it. Let the fireplace go cold, and leave loose pieces where they are. Set out any spare tiles, an old invoice or the manual for a factory-built unit.
Can you repair a marble hearth that has cracked?
Often. We check whether the piece rests evenly and whether the crack is stable. A replacement needs a match in color and veining, which can take time to find. For a factory-built unit, the layers under the marble must still meet the manual.
More Ways to Care for Your Fireplace
- Hurricane and Storm Damage Chimney RepairAssess storm-related chimney concerns and distinguish temporary protection from permanent component repair.
- Top-Sealing Damper InstallationFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Gas Fireplace VentingAssess and repair the gas fireplace vent arrangement using components suited to the identified system.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo