Chamber repair above the damper for homes in Country Walk
A written record of the chamber work, with the product and its curing steps, stays with you.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When the smoke chamber deserves a closer look
- Cracks across the smoke shelf surface
- An earlier coating flaking away
- Gaps around the damper frame
- Loose mortar at the base of the flue
Jump to
How we repair a smoke chamber in Country Walk
Reaching the chamber through the damper opening
All chamber work passes through the damper opening. A narrow throat or a rusted damper plate can make that access tight. Sometimes the plate or the whole damper has to come out for the chamber to be reached properly.
Whether the damper stands in the way is part of what the assessment answers. When it has to come out, the estimate explains how it goes back in afterwards. Damper repair or replacement is a separate service, priced on its own line so you can decide on it independently.
What a smoke chamber rebuild involves
A smoke chamber rebuild takes down unsound chamber walls and lays them again with masonry suited to the location. The new walls are shaped to slope evenly toward the flue, within the limits the code sets, and are then parged smooth.
It is a larger job than parging, with more access work at the damper and more time before the fireplace returns to use. We explain the extent, the materials, and how the lowest flue tile will be supported during and after the work.
Smoke that slows down leaves more behind
One maker of chamber repair products describes the chamber as a funnel. When its surface is smooth and well shaped, smoke moves through quickly. When the surface is rough or cracked, smoke slows, cools and leaves more deposits on the walls.
That is the practical case for smoothing a rough chamber. It does not mean every chamber with deposits needs parging. Deposits also depend on the wood burned and how the fire is run. We explain which factors we can see in your fireplace and what part the chamber plays among them.
Keeping mortar droppings off the shelf
Construction guidance asks for the smoke shelf to be kept free of mortar droppings and debris while a fireplace is built, because they disturb the flow of smoke. It suggests laying a sheet on the shelf during the work and drawing it out through the throat afterwards.
Chamber repair raises the same concern. Refractory mortar that falls onto the shelf or the damper can set hard where it lands. We protect those surfaces while we work and clear any droppings before they cure, so the damper still closes and the shelf stays even.
The chamber work covered in Country Walk
- Loose mortar scraped back to sound
- Smoke shelf cleared and repaired
- Gaps around the lowest flue tile closed
- Maker's care instructions passed on
More about smoke chamber repair in Country Walk
How soon can I use the fireplace after chamber repair?
That follows the curing steps for the product used. One maker asks for the new surface to air cure with the damper open before a small conditioning fire, and for fires to stay small for a while after. We give you the steps in writing.
Is there a discount on chamber work after the free inspection?
Yes. Chamber work you approve within 72 hours of your own free inspection is 10% off. The estimate shows the figure before you decide, and nothing is scheduled until you agree to it.
What should I tell you when I call about the smoke chamber?
Mention any fallen mortar or brick, changes in how the fire draws, staining above the opening and when the chimney was last swept. Earlier notes about the chamber help too. Keep the fireplace cold and unused until we have looked.
More Ways to Care for Your Fireplace
- Chimney Flue RepairAssess repairs to damaged existing flue linings and distinguish them from a new liner installation.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Wood-Burning Fireplace Insert InstallationFit a wood-burning insert after assessing its host fireplace and full connection requirements.
- Fireplace RestorationCoordinate fireplace repairs while preserving suitable existing features and defining the intended use.
- Hurricane and Storm Damage Chimney RepairAssess storm-related chimney concerns and distinguish temporary protection from permanent component repair.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo