Chamber repair above the damper for homes in Davie
Damper, firebox and flue findings are listed separately, so the chamber estimate stays clear.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
What you may notice below a failing chamber
- Mortar crumbs on the firebox floor
- A hole where a brick has fallen
- A gap under the lowest flue tile
- Chamber questions after a chimney fire
Jump to
Chamber repair choices for homes in Davie
The chamber carries the first flue tile
The sloping walls at the top of the chamber support the lowest clay tile of the flue. Guidance on fireplace design says flue tiles should be supported on all sides. If the chamber top is cracked or eroded, that support weakens.
We look at how the lowest tile sits on the chamber and whether gaps have opened around it. Closing those gaps is part of chamber repair. If the tile itself is damaged, it becomes a flue repair item, listed on its own.
Following up an earlier note about the chamber
A sweep or another company may have noted a rough, cracked or unparged chamber. The exact wording helps. A note about stepped brick and a note about missing brick point to different next steps. Notes that name a location, such as the back wall or the shelf, are the most useful.
Pass that note on when you arrange the free inspection. We examine the part of the chamber it describes, say whether our view matches, and describe what we see. Where our view differs, the reason is explained plainly and tied to what is visible.
Leave loose chamber material where it is
It can be tempting to reach up past the damper and pull at loose mortar or brick. That can bring down more than expected, and the pieces may be hot, sharp or covered in deposits.
Leave the chamber as it is until the assessment. If pieces have already fallen, set a few aside to show us. Sweeping the firebox floor is fine once it is cold. We examine the area and explain what is loose and what is still sound.
Chambers below a damper at the chimney top
Some fireplaces close the flue with a damper at the top of the chimney, worked by a cable or chain from the firebox. The throat below may then have no plate, or an old plate that is held open or removed. Access to the chamber can be easier as a result.
A top-mounted damper is a separate component with its own service. When we work on the chamber beneath one, we protect the control cable and leave it working as we found it. If the damper at the top needs attention, we describe it and price it on its own line.
Checked and priced before chamber work begins
- Inside corners rounded and smoothed
- Damper seat checked for gaps
- Hearth and floor covered during work
- Hidden sections named in the findings
Smoke chamber repair questions, answered plainly
Will you repair the damper while working on the chamber?
Only if you approve it. Damper repair or replacement is a separate service with its own price. If the damper has to come out for access, the estimate states how it is refitted afterwards, whether or not you choose damper work.
Can I look at my smoke chamber myself?
With the fireplace cold, you can shine a light up past the open damper without reaching in. Please do not pull at loose material. It can bring more down, and the pieces may be sharp or coated in deposits.
Is a chamber with no smoke shelf built wrongly?
Not necessarily. Some designs, such as Rumford fireplaces, rise straight from the firebox to the flue without a shelf. Masonry guidance describes that as a streamlined arrangement. We repair the chamber you have and do not add parts it was not built with.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo