
Stone veneer chimney repair in Boca Del Mar, backing first
We check the weep screed, flashing and barrier behind stone veneer, not just the stones.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Where stone chimneys tend to show wear
- Pieces of stone or mortar on the roof
- Stains inside near the fireplace wall
- Cracks running through the stones themselves
- Stone buried in the roofing at the base
Jump to
Stone chimney work explained
Stone on a framed chase
Stone on a framed chimney chase is carried by the sheathing and framing behind it. The manufactured stone guide shows two layers of barrier, lath and a scratch coat over the sheathing. It also notes that clearances to the chimney inside follow the chimney maker's requirements.
If the sheathing or framing has softened, resetting stones on it will not last. That framing repair is a separate service, done first. We explain what we can see and what an opening would tell us before recommending the order of work.
Plants growing from the joints
Seeds lodge in open joints, and roots follow the moisture. As plants grow, they widen the joint and push stones apart. A green tuft on a chimney means water and soil have found a home in the stonework. Roots left in a joint can regrow, so they come out fully.
We remove the plant and its roots carefully, rake out the disturbed mortar and repoint. We also look at why that joint stayed open and damp. Pulling plants yourself from roof height is not worth the risk, and it can loosen the stones around the roots.
Maintenance visits for a stone chimney
A stone chimney benefits from a periodic look at its joints, any loose stones, the top and the drainage edge. A single loose stone found early is a small job, and so is a short run of open joints.
Ask about maintenance visits once your repair is complete. We check the repaired area and the rest of the chimney, then tell you what needs attention and what can safely wait. Visits are booked whenever you want one, and each starts from the record of what we repaired.
Reset, replace or repoint
Most stone chimney repairs combine resetting, replacing and repointing. Resetting puts sound stones back in a proper bed. Replacing swaps broken or eroded stones for matched ones. Repointing renews worn joints. A single chimney can need all three in different places.
The balance depends on what we find. We explain why each stone or joint falls into one group or another, and the estimate lists them that way. You can then see where the work and the cost sit, and adjust the scope if you wish.
Pieces of a stone chimney repair scope
- Agreed removal of loose or displaced stones
- Joint profile and color matched to existing
- Gentle cleaning of mortar smears
- Written record of stones reset and replaced
Chimney stone questions with plain answers
Is there a warranty on stone chimney repair?
Our work carries a workmanship warranty. We explain its terms with the estimate, and the written record of the work lists which stones were reset, which were replaced and which joints were repointed.
What should I mention when I call about stone damage?
Say which stones moved or fell, where they are, whether the area gets wet after rain and any past repairs. If you know the stone product or who installed it, mention that too.
Can you repair stone on a framed chimney chase?
Yes, while respecting what the stone hangs on. Stone on a framed chase relies on the sheathing, barrier and lath behind it. If the framing is damaged, that repair comes first as a separate item.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo

