Stone chimney repair for a home in Flagami
From one loose stone to a whole face, you approve the scope and price before we begin.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Stonework changes worth a closer look
- A stone that moves when touched
- Thin gaps around individual stones
- Flaking layers on the face of a stone
- Mortar that powders when scratched
Jump to
Resetting and repointing chimney stone
Solid stone chimneys and their joints
A chimney built of solid stone relies on its mortar joints to hold it together and to keep water out. There is no separate backing to fail, but the joints wear with weather and age. Solid stone can also hide a rubble core, which is another reason we look at joints closely.
Repair here centers on repointing, along with resetting individual stones that have moved. The new mortar should suit the stone rather than overpower it. If stones have shifted as a group, we look more closely at whether the chimney itself has moved, which is a separate conversation from joint repair.
Raking out worn joints by hand
Repointing starts by removing deteriorated mortar back to sound material. National Park Service guidance on repointing warns that power tools can chip the edges of masonry units. With stone, a chipped edge cannot be put back. Joints are cleared to a consistent depth so the new mortar has a sound bond on every side.
We rake joints with hand tools where the stone is fragile or irregular, and use careful mechanical methods only where they will not harm it. Each joint is cleaned of dust and dampened before new mortar goes in, so the fresh mortar grips the stone on both sides.
Getting new joints to blend with old ones
New mortar is darker when wet and lightens as it cures. Judging a color match on the day it goes in can mislead. The sand in the mix drives most of the final color and texture.
Where joints will be visible, we prepare a small sample and judge it once it has dried. National Park Service guidance on repointing stresses matching color and texture as well as strength. You see the dried sample before the full repointing goes ahead, and you can ask for an adjustment.
Simple habits that protect stonework
Keep sprinklers pointed away from the chimney and gutters near it clear, and watch for stones that change position. If a stone looks loose, keep people clear of it and leave it where it is. A quick look from the yard after strong wind or heavy rain is enough to spot most changes.
Avoid pressure washing the stone or using acid cleaners yourself, and resist filling joints with caulk. Each of those makes a later repair harder and can mark the stone. Describe anything unusual to us, and we will say whether it needs a look.
The stone repair scope, item by item
- Identification of the stone assembly and backing
- Debris cleaned up and hauled away
- Unused brackets and fixings removed or sealed
- Roots and plants cleared from joints
What people ask about stone chimney repair
Is a stone veneer chimney repaired differently from a solid stone one?
Yes. Solid stone carries its own weight and relies on its joints. Veneer depends on a backing, ties or a mortar bed, and a drainage path behind it. The repair addresses whichever part has failed.
Can you find replacement stones that match my chimney?
Sometimes exactly, sometimes only closely. Manufactured stone lines change, and natural stone varies by source. Paperwork naming the product helps. We show you options before any new stone goes on the chimney.
Can stone joints be repointed without removing stones?
Often, yes. Worn mortar is raked out to sound material, and the joints are refilled and tooled. Stones come off only when they are loose or when something behind them needs attention.
More Ways to Care for Your Fireplace
- Chimney Animal RemovalAssess occupied chimney openings and plan appropriate follow-up cleaning or entry protection.
- Chimney Crown RepairRepair the damaged chimney top with an approach matched to the crown and supporting masonry.
- Chimney Leak RepairFind the chimney water entry point and plan a repair before restoring the damaged finish.
- Chimney Liner Installation and ReliningPlan a compatible chimney liner installation with the existing passage, connections and maintenance access considered together.
- Gas Fireplace InstallationCreate a complete gas fireplace installation plan for the room, appliance and connected systems.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo