Stone chimney repair for a home in Franklin Park
Your estimate separates stone resetting, repointing and any backing or flashing work.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Stone chimney warning signs for homes in Franklin Park
- Open or crumbling joints between stones
- Pieces of stone or mortar on the roof
- Cracks running through the stones themselves
- A stone face pulling away from the wall
Jump to
Stone chimney repair on homes in Franklin Park
A top that throws water past the stone
The top of a stone chimney needs a cap, crown or cover that throws water clear of the stone face. The Florida Building Code describes masonry chimney caps that slope to shed water and carry a drip edge. The stone installation guide shows the cap lapping over the top of the veneer.
If water is running off the top onto the stone, joints below will keep failing. We check the top and list any work there separately, so you can decide on the stone repair and the top together.
Cracks running through the stones
A crack running through a stone, rather than around it, can come from movement, a hard knock or stress passed on by the joints. Cracks that line up across several stones point to movement in the wall behind them.
We map the cracks to see whether they form a line. Single cracked stones can be replaced. A line of cracks calls for a closer look at the backing or the structure, which we explain before recommending anything further. Replacing stones along a moving line only moves the crack.
Plants growing from the joints
Seeds lodge in open joints, and roots follow the moisture. As plants grow, they widen the joint and push stones apart. A green tuft on a chimney means water and soil have found a home in the stonework. Roots left in a joint can regrow, so they come out fully.
We remove the plant and its roots carefully, rake out the disturbed mortar and repoint. We also look at why that joint stayed open and damp. Pulling plants yourself from roof height is not worth the risk, and it can loosen the stones around the roots.
Brackets and fixings set into stone
Antenna mounts, lights and cable clips are sometimes fixed into stone or its joints. Each fixing makes a hole, and each hole is a small path for water into the backing. Fixings driven into stone can also crack it, especially near an edge.
We note every fixing during the inspection. Unused ones can be removed and the holes filled with matched mortar. Fixings that must stay are sealed properly. If any equipment belongs to a service provider, let us know before we touch it, so it can be moved or reset correctly.
Inside a stone chimney repair estimate
- Corroded ties noted and addressed
- Gentle cleaning of mortar smears
- Roof and landscape protection during work
- Open areas covered at the close of each work day
Stone repair answers for homes in Franklin Park
Can the original stones go back after they come loose?
Usually, if the stone itself is sound. We clean its back and the setting surface, check the backing, and reset it in fresh mortar. Cracked or badly eroded pieces may need replacing, and we show you which ones first.
Will new mortar joints match the old ones?
We match color, texture and joint profile as closely as materials allow and judge samples once they are dry. New joints can look fresher at first and tend to settle in as they weather.
How long does a stone chimney repair take?
It depends on how many stones need resetting, whether backing work is involved and the weather, because mortar needs curing time. We give you the planned sequence together with the estimate.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo