Chimney stone reset and repointed in Key Biscayne
We trace water behind the stone first, so new joints are not sealing in an old leak.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Where stone chimneys tend to show wear
- Pieces of stone or mortar on the roof
- Damp patches that linger on the stone
- Stains inside near the fireplace wall
- Mortar that powders when scratched
Jump to
Stone chimney repair in plain terms
Getting new joints to blend with old ones
New mortar is darker when wet and lightens as it cures. Judging a color match on the day it goes in can mislead. The sand in the mix drives most of the final color and texture.
Where joints will be visible, we prepare a small sample and judge it once it has dried. National Park Service guidance on repointing stresses matching color and texture as well as strength. You see the dried sample before the full repointing goes ahead, and you can ask for an adjustment.
Stone on a framed chase
Stone on a framed chimney chase is carried by the sheathing and framing behind it. The manufactured stone guide shows two layers of barrier, lath and a scratch coat over the sheathing. It also notes that clearances to the chimney inside follow the chimney maker's requirements.
If the sheathing or framing has softened, resetting stones on it will not last. That framing repair is a separate service, done first. We explain what we can see and what an opening would tell us before recommending the order of work.
Where stone repair starts for homes in Key Biscayne
For a stone chimney in Key Biscayne, we start in the same place every time: identify the stone and what holds it, then find where water gets in. There is no charge for the inspection, and you get the estimate in writing. Tell us what you have noticed so far, and the visit is planned around it.
From there, we reset, replace and repoint only what you approve. Opened areas are sheltered overnight, and the site is left clean when the work ends. You receive a written record listing each stone and joint we worked on.
Keeping you informed on curing days
Some days on a stone job are spent letting mortar cure, with nobody on the roof. We mark those days on the schedule we give you, so a quiet day does not look like a forgotten job. You can also ask where things stand at any point and get a straight answer.
Rain or an unexpected finding can shift the plan, and we call you when it does. Any face still open stays sheltered in the meantime. The record you receive at the end lists the work in the order it was done.
What your stone repair estimate covers
- Scratch coat or lath repair behind adhered veneer
- Separate line for flashing work at the roof
- Hose water test when the job calls for it
- Final review of joints, edges and blend
Questions about chimney stone in Key Biscayne
Is a stone veneer chimney repaired differently from a solid stone one?
Yes. Solid stone carries its own weight and relies on its joints. Veneer depends on a backing, ties or a mortar bed, and a drainage path behind it. The repair addresses whichever part has failed.
Why is water getting in behind the stone on my chimney?
Common routes include the top, open joints, the roof junction and a blocked drainage edge at the base. We check each one and, when the job calls for it, use a hose water test to confirm the route.
Why did stones on my chimney come loose?
Common causes include poor mortar coverage behind the stones, water in the backing, corroded lath or ties, and movement. The stone that came off often shows which cause applies, so we look closely at its back.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo