Chimney stone repair for homes in Leisure City
From one loose stone to a whole face, you approve the scope and price before we begin.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Stonework changes worth a closer look
- Stones missing from the chimney face
- A section of stone bulging outward
- Loose stones above a door or walkway
- Stones sitting out of line with the rest
Jump to
Stone, mortar and water, handled in order
Plants growing from the joints
Seeds lodge in open joints, and roots follow the moisture. As plants grow, they widen the joint and push stones apart. A green tuft on a chimney means water and soil have found a home in the stonework. Roots left in a joint can regrow, so they come out fully.
We remove the plant and its roots carefully, rake out the disturbed mortar and repoint. We also look at why that joint stayed open and damp. Pulling plants yourself from roof height is not worth the risk, and it can loosen the stones around the roots.
Filling and tooling grouted joints
On stone laid with mortar joints, the joints are filled after the stones are set, often with a grout bag. The industry guide describes filling to the chosen depth and tooling once the mortar is thumbprint hard.
We follow that sequence on repairs, so new joints have the same depth and finish as the old ones. Joints filled too early or tooled too late look different and can crack along their edges. Timing is part of the craft, and it is one reason we do not rush a repointing day.
Stone inside the room is a separate matter
This service covers the stone on the outside of your chimney. Stone facing inside the room, around the fireplace opening, raises different questions and involves different work. Knowing where our work stops helps you plan any indoor project separately.
The manufactured stone guide also warns against using manufactured stone where flame can reach it, such as returning into a firebox. If you have questions about stone indoors, ask during the inspection, and we will tell you plainly what we can help with and what falls outside our services.
Different metals meeting behind the stone
Put two unlike metals together in a wet, salty setting and one of them can be eaten away while the other survives. The American Galvanizers Association describes this galvanic effect for zinc-coated steel beside copper or stainless parts, and a coastal location makes it more likely. Fasteners are the usual weak point, because they are small and touch everything.
When flashing, ties or fasteners on a stone chimney near the coast need replacing, we look at what each new part will touch. Unlike metals are separated or avoided, and the materials chosen are written into the estimate.
The stone repair scope, item by item
- Raking deteriorated joints back to sound mortar
- Scratch coat or lath repair behind adhered veneer
- Weep openings cleared in anchored veneer
- Gentle cleaning of mortar smears
Common questions on stone repair
Do you seal stone chimneys after a repair?
Only if it suits the stone and its maker allows it. Some sealers trap moisture or darken stone. If a water repellent is appropriate, it goes on after repairs and curing, as its own line on the estimate.
Why is water getting in behind the stone on my chimney?
Common routes include the top, open joints, the roof junction and a blocked drainage edge at the base. We check each one and, when the job calls for it, use a hose water test to confirm the route.
Can I keep using the fireplace during exterior stone work?
Exterior stone work seldom affects the fireplace. Where a repair reaches the chimney top or the inside of a framed chase, we say whether fires should wait until that section is closed up again.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo