Stone veneer chimney repair in Margate, backing first
If a perfect stone match is not available, we say so and show you the closest options.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Stonework changes worth a closer look
- Damp patches that linger on the stone
- Plants growing out of the joints
- Gaps where the stone meets the chimney top
- Mortar that powders when scratched
Jump to
Stone, mortar and water, handled in order
Blocked weep openings in anchored veneer
Anchored veneer drains through weep openings near its base and above flashings. Mortar droppings and debris can block them over time, trapping water in the space behind the stone. A wall that cannot drain holds water against the ties and the back of the stone.
We check that weeps are open where they should be. Clearing them is simple work that can make a real difference to how the wall dries. If weeps are missing where the design needs them, we explain the options for adding drainage. Those options are priced separately, because they involve opening joints.
Why stone is priced after a visit
Two loose stones can sound alike on the phone and need very different repairs. One may simply need resetting. The other may sit on corroded lath or soaked framing that must be repaired first. Even the stone type can be hard to judge from a description.
The free inspection replaces a guess with findings. The written estimate is based on what we saw, with notes on what remains hidden. Any change to the scope comes back to you before it happens, with its price attached.
Stone ledges where the chimney narrows
Stone chimneys that step in as they rise have ledges at each change in width. Water sits there longer, and the stones and joints on those ledges tend to wear before the vertical faces do. Debris collecting on a ledge also holds moisture against the stone.
We check each ledge for slope, open joints and loose stones. Repairs aim to restore a surface that sheds water quickly. If a metal flashing over a ledge would serve it better, we explain it as an option with its own price and show how it would look.
Reset, replace or repoint
Most stone chimney repairs combine resetting, replacing and repointing. Resetting puts sound stones back in a proper bed. Replacing swaps broken or eroded stones for matched ones. Repointing renews worn joints. A single chimney can need all three in different places.
The balance depends on what we find. We explain why each stone or joint falls into one group or another, and the estimate lists them that way. You can then see where the work and the cost sit, and adjust the scope if you wish.
The stone repair scope, item by item
- Cleaning stone backs and setting surfaces
- Removal of caulk, foam and failed patches
- Debris cleaned up and hauled away
- Roots and plants cleared from joints
What people ask about stone chimney repair
Can the original stones go back after they come loose?
Usually, if the stone itself is sound. We clean its back and the setting surface, check the backing, and reset it in fresh mortar. Cracked or badly eroded pieces may need replacing, and we show you which ones first.
Is a stone veneer chimney repaired differently from a solid stone one?
Yes. Solid stone carries its own weight and relies on its joints. Veneer depends on a backing, ties or a mortar bed, and a drainage path behind it. The repair addresses whichever part has failed.
Can stone joints be repointed without removing stones?
Often, yes. Worn mortar is raked out to sound material, and the joints are refilled and tooled. Stones come off only when they are loose or when something behind them needs attention.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo