Stone veneer chimney repair in Navarro Isle, backing first
Ask us to explain any line of the stone estimate before you decide what to approve.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Stone damage you may spot from the ground
- Stones missing from the chimney face
- A section of stone bulging outward
- Rust streaks running down the stonework
- A dark band that stays wet after rain
Jump to
The thinking behind each stone repair
Natural stone and manufactured stone
Natural stone is quarried and cut, and each piece carries its color right through. Manufactured stone is a cast concrete product, shaped and colored to look like stone. From the yard, the two can look very much alike.
They differ in weight, in how they are installed and in how they are repaired. Manufactured stone follows its maker's instructions and the industry installation guide for adhered veneer. Natural stone follows masonry practice. We tell you which one we believe you have, and why, before recommending a repair.
Getting new joints to blend with old ones
New mortar is darker when wet and lightens as it cures. Judging a color match on the day it goes in can mislead. The sand in the mix drives most of the final color and texture.
Where joints will be visible, we prepare a small sample and judge it once it has dried. National Park Service guidance on repointing stresses matching color and texture as well as strength. You see the dried sample before the full repointing goes ahead, and you can ask for an adjustment.
Putting original stones back
The best match for a stone on your chimney is usually the stone itself. Pieces removed with care can often be cleaned and reset. That keeps color, texture and weathering consistent across the repair. Reused stones also carry the same weathering as their surroundings, which new stone cannot copy.
We handle removed stones carefully and store them safely until they go back. Cracked or eroded pieces are set aside and discussed with you before anything is discarded. The written record notes which stones were reused and which were replaced, and where the new ones went.
Maintenance visits for a stone chimney
A stone chimney benefits from a periodic look at its joints, any loose stones, the top and the drainage edge. A single loose stone found early is a small job, and so is a short run of open joints.
Ask about maintenance visits once your repair is complete. We check the repaired area and the rest of the chimney, then tell you what needs attention and what can safely wait. Visits are booked whenever you want one, and each starts from the record of what we repaired.
Line items in a stone chimney estimate
- Agreed removal of loose or displaced stones
- Weep screed cleared or reset at the base
- Moist curing of new mortar
- Written record of stones reset and replaced
Before you book stone chimney repair
Is there a discount for booking stone work soon after the inspection?
It does. Book the stone work within 72 hours of your own free inspection and 10% comes off that service. Each price on the estimate is shown in full, so the saving is easy to see.
Why is water getting in behind the stone on my chimney?
Common routes include the top, open joints, the roof junction and a blocked drainage edge at the base. We check each one and, when the job calls for it, use a hose water test to confirm the route.
Can you repair stone on a framed chimney chase?
Yes, while respecting what the stone hangs on. Stone on a framed chase relies on the sheathing, barrier and lath behind it. If the framing is damaged, that repair comes first as a separate item.
More Ways to Care for Your Fireplace
- Chimney Sweep and Chimney CleaningArrange careful chimney cleaning in Miami with a defined scope, protected work area and useful findings.
- Top-Sealing Damper InstallationFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
- Chimney Leak RepairFind the chimney water entry point and plan a repair before restoring the damaged finish.
- Chimney TuckpointingRenew deteriorated mortar joints around chimney bricks that can appropriately remain.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo