Chimney stone reset and repointed in Pompano Beach
Tell us which stones moved and where, and we will define the repair area with you.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Joint and stone symptoms that point to water
- A stone that moves when touched
- Damp patches that linger on the stone
- Cracks running through the stones themselves
- Gaps where the stone meets the chimney top
Jump to
Stone chimney repair, from backing to joints
Caulk and foam left by earlier repairs
Caulk, foam and construction adhesive sometimes appear in stone joints after quick fixes. They seal the surface but not the joint, and they take the place of the mortar that belongs there. Caulk also traps water behind it, which can keep the stone bed wet.
We remove those materials before repointing, so new mortar can fill each joint properly. If adhesive has been used to hold stones, those stones are checked and reset in mortar. The estimate lists that removal work separately, because it can take longer than the repointing itself.
Curing new mortar properly
Mortar needs moisture to cure well. The stone installation guide recommends moist curing of the scratch coat and describes extra care in hot weather, such as shading the work and misting the wall.
We plan the work around the conditions on the day and keep fresh mortar damp as it cures. On hot, sunny faces that can mean starting earlier or working in shorter stretches. Mortar that dries too fast cracks and loses its grip on the stone, so curing is part of the job, not waiting time.
Lifting stones to reach the flashing
On some chimneys, the flashing at the roof is tucked behind the lowest stones. Repairing it properly can mean lifting those stones and setting them back afterward. Those stones are numbered or laid out in order so each goes back where it came from.
When that is the case, the flashing work and the stone resetting are planned together, so the flashing is finished before the stones cover it again. Flashing is its own service with its own line on the estimate, and the stone work needed to reach it appears right beside it.
Checking stones by sound and touch
A well-set stone feels solid and sounds dense when tapped. A stone that rings hollow or rocks slightly under the hand has lost part of its bed, even if it looks fine. It is a simple test, but it catches problems the eye misses.
We test stones across each face, not only the ones you point out. That finds weak pieces before they fall and keeps the repair area accurate. The stones we mark are listed on the estimate, so you can see exactly which ones need attention and where they are.
Inside a stone chimney repair estimate
- Loose stone mapping across each face
- Separate line for crown, cap or cover work
- Roof and landscape protection during work
- Written record of stones reset and replaced
Questions about chimney stone in Pompano Beach
Why not just glue a loose stone back in place?
Adhesive is not a substitute for a proper mortar bed on an exterior wall. A glued stone can let go again, and the glue can block the drainage behind it. We reset stones the way the assembly was meant to hold them.
Will new mortar joints match the old ones?
We match color, texture and joint profile as closely as materials allow and judge samples once they are dry. New joints can look fresher at first and tend to settle in as they weather.
Is same-day service available for loose chimney stone?
Same-day service is available when the schedule allows, often to assess a loose stone or make an area safe. Resetting and repointing need curing time, so most stone repairs take more than one visit.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo