Skip to content
(645) 465-4171

Chimney stone repair for homes in Roosevelt Gardens

Homes in Roosevelt Gardens get the same order of work from us: water first, backing next, stone last.

  • Owned and run locally
  • Available for same-day service
  • Fully licensed and insured
  • Family owned and run

Stone chimney warning signs for homes in Roosevelt Gardens

  • Flaking layers on the face of a stone
  • Gaps where the stone meets the chimney top
  • Loose stones above a door or walkway
  • Mortar that powders when scratched
Jump to

What goes into a lasting stone repair

Loose stones near the chimney top

The top courses of a stone chimney are the most exposed. Water from the crown, cap or cover lands on them first, and they carry little weight above them to help hold them in place. Stones set just under a crown can also be pushed by a crown that has shifted.

We examine the top edge closely. Stones there are reset with care, and the way the top sheds water is checked at the same time. If the top needs its own repair, it becomes a separate line, planned before or alongside the stone work so the new joints are protected.

Confirming the water route with a hose

Water can reach the inside of a house by more than one route. When the job calls for it, a hose water test wets the chimney section by section with someone watching indoors, so the stone can be told apart from the top and the roof.

It takes patience, so we suggest it only when the answer will change what we repair. We explain the plan before we start and the result afterward. The estimate then reflects what the test showed rather than a guess about the water path.

Old, hard mortar in stone joints

Earlier repointing is sometimes done with a mortar much harder than the stone. National Park Service guidance explains why that harms masonry, since the stone becomes the weaker partner and takes the damage. Hard joints also tend to crack along the stone edge, letting water in behind them.

We look for chipped or flaking stone edges beside hard joints. Where old hard mortar can come out without harming the stone, we replace it with a more suitable mix. Where removal would damage the stone, we explain the options and their limits before any work begins.

Chimneys that mix stone and brick

Some chimneys use stone on the lower part and brick or another material above, or brick at the corners and the top. Each material has its own repair methods and its own mortar needs. Brick and stone may also need different mortars, which matters where they share a joint.

This service covers the stone. Brick work belongs to our masonry repair service and is priced as its own item. Where the two materials meet, we plan the joint so both repairs finish cleanly together and water is not trapped at the change.

Stone repair items you can approve

  • Joint profile and color matched to existing
  • Corroded ties noted and addressed
  • Removal of caulk, foam and failed patches
  • Hose water test when the job calls for it

Your stone chimney questions

What if the backing behind the stone is damaged?

We stop and show you what we found. Backing repair, such as lath, scratch coat or framing work, is priced as its own item. The stone goes back once the surface behind it is sound again.

Why is water getting in behind the stone on my chimney?

Common routes include the top, open joints, the roof junction and a blocked drainage edge at the base. We check each one and, when the job calls for it, use a hose water test to confirm the route.

Can you repair stone on a framed chimney chase?

Yes, while respecting what the stone hangs on. Stone on a framed chase relies on the sheathing, barrier and lath behind it. If the framing is damaged, that repair comes first as a separate item.

Proudly American

Local service. Careful repairs. A fireplace worth coming home to.

Call Now (645) 465-4171

Book Your Free Inspection in Miami

(645) 465-4171

Send your details for a free Miami chimney or fireplace inspection. We will call to confirm the appointment.

Chimney & Fireplace Brands We Work With