Stone veneer chimney repair in San Marco Island, backing first
If a perfect stone match is not available, we say so and show you the closest options.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Stonework changes worth a closer look
- Damp patches that linger on the stone
- Stains inside near the fireplace wall
- Stones sitting out of line with the rest
- A stone face pulling away from the wall
Jump to
Stone, mortar and water, handled in order
The line where chimney stone meets roofing
A stone chimney that rises through a roof needs flashing that turns water onto the roof. The stone should finish above the roofing, not sit in it. The manufactured stone installation guide shows the flashing extending past the chimney and the stone stopping above it.
We inspect this junction together with the stone. Flashing repair is a separate service with its own price. If stones must come off to reach the flashing, resetting them is included in the same plan, so neither job undoes the other.
Stones flaking away in layers
Some natural stones split along their layers when water gets into them, and the face then flakes off in sheets. Hard mortar around a soft stone can make this worse, because moisture escapes through the stone rather than the joint.
We look at how deep the flaking goes. A stone with a sound core may be left in place, turned or dressed back. A badly damaged one is replaced with a matched piece. We also look at the joints around it, since they may be part of the cause.
Room to move where backings change
The manufactured stone guide calls for movement joints where movement concentrates, for example where a framed wall meets a concrete or masonry wall. Stone laid straight across that line can crack along it as the two backings move differently.
If a crack runs where two backings meet, the fix may be a proper joint rather than a stronger patch. We explain where such a joint would go and how it will look before recommending it, because a joint is visible and you should agree to its position.
Mortar for manufactured stone
Manufactured stone is set and pointed with mortars its maker and the industry guide describe, including polymer-modified mortars for some surfaces. The right one depends on the backing, the product and the conditions on the day. Mortar that suits one backing can fail on another, which is why the surface matters as much as the stone.
We choose mortar for your stone and your surface, not a single mix for every job. Where the product is unknown, we choose conservatively and explain why. The estimate names the mortar type in plain words, and the written record confirms what was used.
The stone repair scope, item by item
- Replacement stones blended with the originals
- Separate line for crown, cap or cover work
- Roof and landscape protection during work
- Sealant joints at changes of material
Answers on repointing chimney stone
Should I pull out a loose stone before it falls?
Please do not. Stones are heavier than they look and can bring others with them. Keep everyone away from the ground beneath it, let us know which face it is on, and we will look at it early in the visit.
Do you cover open areas if the work takes more than a day?
Yes. Before we leave each day, any area where stones are off is sheltered from rain, and removed stones are stored safely until they go back. Loose debris goes with us rather than staying on the roof.
Is there a discount for booking stone work soon after the inspection?
It does. Book the stone work within 72 hours of your own free inspection and 10% comes off that service. Each price on the estimate is shown in full, so the saving is easy to see.
More Ways to Care for Your Fireplace
- Fireplace RestorationCoordinate fireplace repairs while preserving suitable existing features and defining the intended use.
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
- Chimney Masonry RepairRepair affected chimney brickwork and joints with materials selected for the construction already in place.
- Gas Fireplace Repair and ServiceGet a model-specific gas fireplace service plan for the fault you are seeing or the maintenance your unit needs.
- Chimney Liner Installation and ReliningPlan a compatible chimney liner installation with the existing passage, connections and maintenance access considered together.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo