Stone chimney repair in Silver Bluff matched to your stone
From one loose stone to a whole face, you approve the scope and price before we begin.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs the stone on your chimney needs repair
- Stones missing from the chimney face
- Pieces of stone or mortar on the roof
- Damp patches that linger on the stone
- Gaps where the stone meets the chimney top
Jump to
Resetting and repointing chimney stone
Blocked weep openings in anchored veneer
Anchored veneer drains through weep openings near its base and above flashings. Mortar droppings and debris can block them over time, trapping water in the space behind the stone. A wall that cannot drain holds water against the ties and the back of the stone.
We check that weeps are open where they should be. Clearing them is simple work that can make a real difference to how the wall dries. If weeps are missing where the design needs them, we explain the options for adding drainage. Those options are priced separately, because they involve opening joints.
Lifting a few stones to look behind
When the backing matters, lifting a few loose or damaged stones at an agreed spot is often the cleanest way to see it. We agree the location and the number of stones with you first, and we keep the pieces for resetting.
After looking, we stop and explain. If the backing is sound, the stones go back as part of the repair. If it is damaged, the next step is priced and presented before anything more comes off. You stay in charge of how far the work goes.
Why adhesive does not fix loose stone
Construction adhesive can seem like a quick way to put a stone back. It is not a mortar bed, and it does not restore the grip or the drainage the assembly depends on. Adhesive residue also has to be removed before a proper bed can grip.
A glued stone can let go again and may take adjacent pieces with it. The glue can also block water that should drain down behind the face. We remove adhesive, clean the stone and the surface, and reset it properly in mortar. That takes longer, but it holds.
Chimneys that mix stone and brick
Some chimneys use stone on the lower part and brick or another material above, or brick at the corners and the top. Each material has its own repair methods and its own mortar needs. Brick and stone may also need different mortars, which matters where they share a joint.
This service covers the stone. Brick work belongs to our masonry repair service and is priced as its own item. Where the two materials meet, we plan the joint so both repairs finish cleanly together and water is not trapped at the change.
Stone repair scope for homes in Silver Bluff
- Identification of the stone assembly and backing
- Raking deteriorated joints back to sound mortar
- Separate line for crown, cap or cover work
- Removal of caulk, foam and failed patches
What people ask about stone chimney repair
How do you tell natural stone from manufactured stone?
Weight, edges, the back of a loose piece and the way joints are laid all give clues. Manufactured stone is a cast product with its color concentrated near the face. We tell you what we believe you have and why.
Should I pull out a loose stone before it falls?
Please do not. Stones are heavier than they look and can bring others with them. Keep everyone away from the ground beneath it, let us know which face it is on, and we will look at it early in the visit.
Can you repair stone on a framed chimney chase?
Yes, while respecting what the stone hangs on. Stone on a framed chase relies on the sheathing, barrier and lath behind it. If the framing is damaged, that repair comes first as a separate item.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo