Stone chimney repair for a home in Tarpon River
Upfront prices, a workmanship warranty and a written record come with every stone repair we carry out.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Stone damage you may spot from the ground
- Open or crumbling joints between stones
- Plants growing out of the joints
- A dark band that stays wet after rain
- Stones sitting out of line with the rest
Jump to
Our approach to stone chimney repair
A top that throws water past the stone
The top of a stone chimney needs a cap, crown or cover that throws water clear of the stone face. The Florida Building Code describes masonry chimney caps that slope to shed water and carry a drip edge. The stone installation guide shows the cap lapping over the top of the veneer.
If water is running off the top onto the stone, joints below will keep failing. We check the top and list any work there separately, so you can decide on the stone repair and the top together.
Stone at the chimney corners
Corners take knocks and weather from two sides. On manufactured stone, corners are often formed with purpose-made corner pieces. On natural stone, corner stones are dressed to show two finished faces. Corners also show a mismatch more than flat faces do, so matching gets extra care there.
A loose or broken corner piece exposes the backing on two sides at once. We check every corner along its height. Replacement corners are matched to the product or shaped to fit, and set in a full bed like any other stone, with the joints tooled to match the faces on either side.
Curing new mortar properly
Mortar needs moisture to cure well. The stone installation guide recommends moist curing of the scratch coat and describes extra care in hot weather, such as shading the work and misting the wall.
We plan the work around the conditions on the day and keep fresh mortar damp as it cures. On hot, sunny faces that can mean starting earlier or working in shorter stretches. Mortar that dries too fast cracks and loses its grip on the stone, so curing is part of the job, not waiting time.
Thin natural stone veneer
Natural stone can also be cut thin and adhered like manufactured stone. It is real stone, with its color through its full thickness, but it is installed as an adhered veneer over a backing. It is heavier than most manufactured stone, which adds to the demands on the backing.
That means its repair questions are those of adhered veneer, covering barrier, lath, scratch coat, bedding and drainage. The stone itself is matched and cut like natural stone. We explain both sides of the repair in the estimate, so the method and the materials are clear.
How we itemize stone chimney work
- Weep screed cleared or reset at the base
- Gentle cleaning of mortar smears
- Debris cleaned up and hauled away
- Written record of stones reset and replaced
Stone chimney repair questions
Do you seal stone chimneys after a repair?
Only if it suits the stone and its maker allows it. Some sealers trap moisture or darken stone. If a water repellent is appropriate, it goes on after repairs and curing, as its own line on the estimate.
What mortar do you use for repointing stone?
One chosen for the stone and the assembly. For natural stone, the mortar should not be harder than the stone. Manufactured stone follows its maker's guidance. We explain the choice rather than using one mix everywhere.
Is same-day service available for loose chimney stone?
Same-day service is available when the schedule allows, often to assess a loose stone or make an area safe. Resetting and repointing need curing time, so most stone repairs take more than one visit.
More Ways to Care for Your Fireplace
- Chimney Flue RepairAssess repairs to damaged existing flue linings and distinguish them from a new liner installation.
- Gas Fireplace Repair and ServiceGet a model-specific gas fireplace service plan for the fault you are seeing or the maintenance your unit needs.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Gas Fireplace InstallationCreate a complete gas fireplace installation plan for the room, appliance and connected systems.
- Wood-Burning Fireplace Insert InstallationFit a wood-burning insert after assessing its host fireplace and full connection requirements.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo