Chimney stone reset and repointed in Weston
Homes in Weston get the same order of work from us: water first, backing next, stone last.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Stone and joint problems to point out
- Open or crumbling joints between stones
- White deposits washing out of the joints
- Stains inside near the fireplace wall
- Mortar that powders when scratched
Jump to
Repairing natural and manufactured stone chimneys
How a loose stone is reset
Resetting starts with cleaning. Old mortar comes off the back of the stone and off the surface it will sit on, so the new bed has something clean to grip. The setting surface is dampened as the mortar maker directs.
The stone goes back in a full bed of mortar and is pressed until mortar squeezes out at its edges. The joints are then filled and tooled to match. A stone set this way is held across its whole back, not at a few points. Instructions for one manufactured stone say a disturbed stone must come out, be cleaned and be set again rather than pushed back.
Getting new joints to blend with old ones
New mortar is darker when wet and lightens as it cures. Judging a color match on the day it goes in can mislead. The sand in the mix drives most of the final color and texture.
Where joints will be visible, we prepare a small sample and judge it once it has dried. National Park Service guidance on repointing stresses matching color and texture as well as strength. You see the dried sample before the full repointing goes ahead, and you can ask for an adjustment.
Lifting a few stones to look behind
When the backing matters, lifting a few loose or damaged stones at an agreed spot is often the cleanest way to see it. We agree the location and the number of stones with you first, and we keep the pieces for resetting.
After looking, we stop and explain. If the backing is sound, the stones go back as part of the repair. If it is damaged, the next step is priced and presented before anything more comes off. You stay in charge of how far the work goes.
Why chimney stone wears faster than wall stone
A chimney stands above the roof and meets weather on every face. Stone and joints there work harder than the same stone on a sheltered wall lower down the house.
None of that reflects a fault in how your house was built, because it is simply where a chimney sits. It explains why the chimney may need attention before other stonework does. It also explains why its top and its flashing matter so much to any stone repair, because they decide how much water reaches the stone in the first place.
What a stone chimney quote lists
- Agreed removal of loose or displaced stones
- Cleaning stone backs and setting surfaces
- Tooling joints once the mortar firms up
- Water-resistive barrier lapped back behind veneer
Chimney stone questions with plain answers
Should I pull out a loose stone before it falls?
Please do not. Stones are heavier than they look and can bring others with them. Keep everyone away from the ground beneath it, let us know which face it is on, and we will look at it early in the visit.
Do you cover open areas if the work takes more than a day?
Yes. Before we leave each day, any area where stones are off is sheltered from rain, and removed stones are stored safely until they go back. Loose debris goes with us rather than staying on the roof.
What should I mention when I call about stone damage?
Say which stones moved or fell, where they are, whether the area gets wet after rain and any past repairs. If you know the stone product or who installed it, mention that too.
More Ways to Care for Your Fireplace
- Chimney Animal RemovalAssess occupied chimney openings and plan appropriate follow-up cleaning or entry protection.
- Chimney TuckpointingRenew deteriorated mortar joints around chimney bricks that can appropriately remain.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Gas Fireplace Repair and ServiceGet a model-specific gas fireplace service plan for the fault you are seeing or the maintenance your unit needs.
- Firebox RepairRepair the damaged fireplace chamber using an approach suited to masonry or manufactured components.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo