
Chimney repair after strong winds in Brickell
Replacement caps and chase covers are sized to the flue and fastened to the maker's instructions.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Chimney changes to note after strong wind
- Flashing torn at the roof line
- Chimney top leaning or out of line
- Leaves and twigs in the fireplace
- Tree limb resting against the chimney
Jump to
Weather-tight first, then lasting storm repairs
A cap bent but still attached
A cap can stay on the chimney and still be damaged. The hood may be bent down toward the flue, the screen torn or one leg pulled away from its fastening.
A cap bent close to the flue can restrict the flow of smoke, and a torn screen no longer stops sparks or animals. We judge whether the cap can be straightened and refastened or whether it should be replaced. The estimate says which and why. A cap that looks fine from the ground is checked all the same.
New cracks in the crown
The crown is the concrete or masonry top of a masonry chimney. Flying debris or a falling cap can crack it, and wind-driven rain then soaks into the cracks.
We check the crown surface, its edges and the joint around the flue. Fine cracks may be closed with a coating sold for chimney crowns. Wide cracks, loose pieces or a crown that has broken up need a new crown cast in place. We explain which applies after looking at it closely.
Fasteners that match the metal
When two different metals touch in a wet environment, one of them corrodes faster than it would alone. Galvanizing industry guidance explains this reaction and warns against a small part of one metal touching a large area of another.
A stainless cap fixed with plain steel screws is that case, and the screws can corrode until the fastening lets go. We choose fasteners that match the cap or cover. If the old part failed because its fasteners rusted away, we point that out on the visit and make sure the replacement does not repeat it.
Upfront pricing for storm repairs
Storm repairs range from refastening a cap to relaying the top of a chimney. The price depends on which parts were damaged, how much work each needs and how the chimney can be reached safely.
Our pricing is upfront, with no hidden fees. Temporary work and permanent repairs are priced separately, so you can see what each stage costs. If a custom part must be made, its cost is on the estimate. If more damage appears during the work, we explain it and wait for your approval before adding anything.
Inside a storm damage chimney estimate
- Chase cover and storm collar check
- Chase cover shaped to shed water
- Crown cracks sealed or crown recast
- Free written estimate before any work
Your storm damage questions in Brickell
Can you cover an open flue before the permanent repair?
Yes, once the roof is safe to work on. A temporary cover keeps rain and debris out while the permanent repair is arranged. It is listed and priced separately and is not described as the finished repair.
What should I tell you when I call after a storm?
Describe what you see from the ground, what changed inside, such as water or debris in the fireplace, and when you noticed it. Mention whether the chimney is masonry or a metal flue in a framed chase.
Can wind damage the flue lining inside the chimney?
It can, if debris struck the top or the chimney moved. Lining damage is not visible from the ground. We look down the flue as far as the inspection allows and tell you if a closer look is needed.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo
