Storm damage chimney repair for homes in Central Beach
Storm damage chimney repair in Central Beach starts with a free inspection once the roof is safe to reach.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Clues that wind or water got in after a storm
- New water stain near the chimney
- Water in the firebox after the storm
- Storm collar loose on a metal flue
- Roof covering torn around the chimney
Jump to
How we handle a chimney after a storm
Keeping the air gap at the chase top
Some factory-built chimneys need a ventilation opening between the chase top and the pipe, as their installation instructions describe. A replacement cover has to keep that opening.
When we fit a new chase cover, the collar opening is sized to the listed pipe and to any air space the chimney instructions call for. A cover sealed tight to the pipe would defeat that design. We follow the instructions for the chimney you have, and we tell you if the old cover did not.
Fastening to the maker's instructions
Cap, chase cover and chimney makers publish fastening instructions for their parts. They set out how the part is held, where the fasteners go and what they go into.
We follow them when we fit a replacement. Where the old part failed because it was under-fastened or fixed into weak masonry, we explain what will be different this time. The fastening method is part of the permanent repair and is described on the estimate. You can see how the new part will be held against the next strong wind.
White deposits after a soaking storm
A chimney soaked in a storm may show white, powdery deposits on its faces as it dries. Brick industry guidance explains that water moving through masonry carries dissolved material to the surface, where it is left behind.
The deposits are a sign of where water moved. We note them and look for the entry point that let the water in. Once the source is repaired and the masonry dries, the deposits can be cleaned with a suitable method. Cleaning before the source is fixed only brings them back with the next soaking rain.
A cap that gave way because it had rusted
Some caps that blow off in a storm were already weak. Rust at the legs, the band or the bolts can leave a cap held on by very little, and the next strong gust finishes the job.
We look at what is left of the fastening to see how the cap failed. If rust was the cause, the replacement is chosen and fastened so the same weakness does not return. That may mean a different metal, matched fasteners or a different fastening method. We explain the reasoning on the estimate, beside the new part.
Storm damage scope, line by line
- Flashing and counter flashing check
- Interior water entry points noted
- Roof-side work coordinated with your roofer
- Advice on fireplace use until repairs finish
Your storm damage questions in Central Beach
Is a factory-built chimney repaired differently after a storm?
Yes. A factory-built chimney is a listed system, so damaged pipe, storm collars, caps and chase-top parts are replaced with parts the manufacturer lists. The label on the fireplace or chimney helps us identify them.
Is same-day storm repair available?
Same-day visits are available when the schedule allows and the roof is safe to reach. A temporary cover can often go on during that visit. Permanent repairs are scheduled once the extent of the damage is known.
Do you clean up the chimney debris after storm repairs?
Yes. Debris from the damaged chimney and from our work is cleaned up and hauled away. If the work runs over more than one day, an open chimney is covered at the close of each work day.
More Ways to Care for Your Fireplace
- Spalling Brick Repair and Chimney Brick ReplacementReplace deteriorated chimney bricks while retaining suitable surrounding masonry.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
- Chimney Cap Installation and ReplacementProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
- Chimney Flue RepairAssess repairs to damaged existing flue linings and distinguish them from a new liner installation.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo