
Storm-damaged chimneys assessed and repaired in Knoll Ridge
Replacement caps and chase covers are sized to the flue and fastened to the maker's instructions.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Storm damage signs on chimneys in Knoll Ridge
- Chase cover blown off the chase
- Storm collar loose on a metal flue
- Banging from the chimney top in gusts
- Metal pieces on the roof near the flue
Jump to
How we handle a chimney after a storm
Multi-flue caps screwed to the crown
A cap that covers several flues is usually fixed to the crown with masonry anchors. Wind catching its broad lid pulls on those anchors, and they can loosen or crack the concrete around them.
After a storm, we check the anchors, the crown around them and the lid itself. If the crown is sound, the cap can often be reset with new anchors in fresh holes. If the crown has cracked at the anchor points, the crown repair comes first. Both are listed on the estimate separately.
Keeping the air gap at the chase top
Some factory-built chimneys need a ventilation opening between the chase top and the pipe, as their installation instructions describe. A replacement cover has to keep that opening.
When we fit a new chase cover, the collar opening is sized to the listed pipe and to any air space the chimney instructions call for. A cover sealed tight to the pipe would defeat that design. We follow the instructions for the chimney you have, and we tell you if the old cover did not.
Tree limbs and impact damage
A falling limb can crack a crown, break off top courses, bend a cap or tear flashing in one blow. The damage may extend past the point of impact.
Leave large limbs to a tree service to remove safely. Once the chimney is clear, we check the area the limb struck and the parts around it. Each repair is listed separately, from the cap to the masonry. If the impact loosened the chimney, we say so before recommending any lighter repair.
Stains that appear days after the storm
Some leaks show up days after a storm. Water soaks into masonry or framing and then works its way through to an interior finish. The stain appears long after the rain has stopped.
A late stain still points to the chimney if it sits near it. Tell us when it appeared and whether it has grown. We check the chimney top and faces for the entry point. The repair is chosen once the path is clear, not from the stain alone.
Storm repair scope for Knoll Ridge homes
- Chase cover and storm collar check
- Damper checked for water and debris
- Free written estimate before any work
- Advice on fireplace use until repairs finish
Chimney cap and chase cover storm questions
The chase cover lifted in the wind. Can it be refastened?
Sometimes. If the metal is still flat and sound, it may be refastened and resealed. If it is bent, torn or rusted, a new cover shaped to shed water is the better repair. We explain which applies.
How long before permanent storm repairs are finished?
It depends on the damage, the materials and the weather. The chimney is made weather-tight before anything else. Permanent repairs follow on the schedule we agree, and the estimate shows the order they happen in.
Does storm repair include clearing debris from the flue?
Clearing storm debris that blocks the flue, damper or smoke shelf is part of making the chimney safe to use. If the flue also needs a full sweep, that is listed as a separate service with its own price.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo
