Storm damage chimney repair for homes in Palm Springs North
Wind-damaged chimney repair in Palm Springs North, from a loose cap to relaid top courses, explained before work.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
After a storm, what to look for first
- Chimney cap missing after the wind
- New crack across the concrete crown
- Leaves and twigs in the fireplace
- Banging from the chimney top in gusts
Jump to
How we handle a chimney after a storm
Fitting a new cap to the flue it covers
A replacement cap has to fit the flue it covers. The building code asks that the open area under a rain cap stay larger than the flue outlet, so the cap does not choke the draft.
We measure the flue and the top of the chimney before ordering. The cap chosen suits the flue size, the fastening method and the metal around it. If the old cap was the wrong size, we say so and explain why the new one differs. The part is named on the estimate.
Counter flashing pulled from its joint
Counter flashing is let into the masonry and laps down over the base flashing. Masonry guidance for chimneys describes this layered detail. When wind pulls it out of its cut, water gets behind both layers.
We check that the counter flashing is still seated and sealed along its full length. Loose sections are reset into the cut and sealed. Where the cut itself has broken out, the masonry around it is repaired first. The estimate shows the flashing and any masonry work as separate lines.
How we reach the chimney top safely
We reach the chimney top with ladders and fall protection suited to the roof. On a roof damaged by the storm, the route to the chimney is chosen to avoid weak or broken areas.
Safe access is part of the job, not an extra that appears later on the bill. If a roof is too damaged to work from, we explain the options for reaching the chimney another way. We do not take risks that would put people or the roof at further risk, and we tell you if the roof itself needs attention before we can start.
A crack that was there before the storm
Not every crack on a chimney after a storm is new. Some were there before and simply became noticeable once someone looked closely at the chimney top.
We describe the crack, its size and where it runs, and whether it shows signs of recent movement. If it looks older, we say that too. Either way, the repair is listed on its own line with its reason. Keeping older defects separate from fresh damage gives you an honest picture of the chimney as it stands now.
Storm repair items, temporary and permanent
- Crown surface and edge check
- Flashing and counter flashing check
- Crown cracks sealed or crown recast
- Flashing reset or replaced
Questions about wind-damaged chimneys
How long before permanent storm repairs are finished?
It depends on the damage, the materials and the weather. The chimney is made weather-tight before anything else. Permanent repairs follow on the schedule we agree, and the estimate shows the order they happen in.
Is a factory-built chimney repaired differently after a storm?
Yes. A factory-built chimney is a listed system, so damaged pipe, storm collars, caps and chase-top parts are replaced with parts the manufacturer lists. The label on the fireplace or chimney helps us identify them.
Is there a discount on storm damage repairs?
Yes. Storm repairs you approve inside 72 hours of your free inspection are 10% off, and so is anything else booked with them. Both the inspection and the estimate cost nothing either way.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo