Post-storm chimney checks and repairs in The Roads
Wind-damaged chimney repair in The Roads, from a loose cap to relaid top courses, explained before work.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
After a storm, what to look for first
- Chase cover blown off the chase
- Storm collar loose on a metal flue
- Leaves and twigs in the fireplace
- Tree limb resting against the chimney
Jump to
Storm repairs for the whole chimney top
Siding or stucco torn on a chase
A framed chase is covered with siding or stucco, and wind can tear, crack or loosen that finish. Water then reaches the framing behind it.
We check the chase walls from top to bottom and look for water marks inside where we can reach. Loose or torn finish is noted, along with any softness in the framing. Repairs to the chase finish and framing are described as separate items. The chase cover on top is checked at the same time, since water often enters there.
The flue lining after impact
Debris striking the top of a chimney can crack or dislodge the top of the flue lining. The damage may not be visible from the ground, or even from the crown without a close look down the flue.
We look down the flue as far as the inspection allows. If the lining shows cracks, gaps or loose sections near the top, we explain what a closer look would involve and why. Lining repairs are a separate item on the estimate. The fireplace stays unused until we know the flue is sound enough to carry smoke safely.
Banging from the chimney top in gusts
A cap or chase cover that bangs or rattles in the wind is loose. The noise can be the first sign, before the part lifts or falls from the chimney.
Tell us when the noise happens and which direction the wind was coming from. We check the fasteners and the part itself. Refastening a sound part is often enough. A part that has bent from repeated movement is replaced, since it is unlikely to hold tight again. Catching it early usually saves a larger repair after the next storm.
Interior finishes stained by the leak
A leak during a storm can stain drywall, plaster or a ceiling near the chimney. Those interior finishes are outside our work, although the stain is often what prompts the call.
We repair the chimney source of the water and tell you when it has been stopped. Let the interior finish dry fully before it is repaired, so the stain does not come back through new paint. We note on the record of the work where the water entered, which helps whoever repairs the finish understand what happened.
How a storm damage estimate is laid out
- Cap and screen condition and fastening
- Flashing reset or replaced
- Storm debris cleared from flue and firebox
- Free written estimate before any work
Questions about wind-damaged chimneys
How long before permanent storm repairs are finished?
It depends on the damage, the materials and the weather. The chimney is made weather-tight before anything else. Permanent repairs follow on the schedule we agree, and the estimate shows the order they happen in.
Do you replace chimney caps torn off by the wind?
Yes. The new cap is sized to the flue and fastened to the manufacturer's instructions. If the old cap failed at its fasteners, we explain what will hold the new one more securely.
Is a factory-built chimney repaired differently after a storm?
Yes. A factory-built chimney is a listed system, so damaged pipe, storm collars, caps and chase-top parts are replaced with parts the manufacturer lists. The label on the fireplace or chimney helps us identify them.
More Ways to Care for Your Fireplace
- Chimney Chase Cover ReplacementReplace the chase top with a properly planned cover and clearly defined pipe connections.
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
- Ventless Gas Fireplace ServiceService the identified vent-free appliance without bypassing its required safety components.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo