Stucco repairs that blend into chimneys in Alameda
Lath, beads and screeds that have corroded are replaced, not buried under fresh plaster.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Stucco warning signs on homes in Alameda
- Cracks running through the stucco finish
- Rust marks bleeding through the finish
- Old patches cracking at their edges
- Stains in the attic near the chimney
Jump to
Planning a stucco chimney repair in Alameda
Filling a stable stucco crack with repair mortar
A crack that has stopped moving and is wide enough to take water is usually opened slightly and filled, rather than bridged with a coating. Opening it gives the repair mortar a clean, sound edge to bond to.
The mortar is chosen to behave like the surrounding stucco and is finished to match its surface. We keep the repair within the crack line and its immediate edges. Where the crack runs into loose plaster, the repair becomes a patch instead, and we explain that change before making it.
Scheduling stucco coats around rain
Heavy rain on fresh stucco can wash out the surface and mark the finish. The base coat maker's instructions call for protecting new work from rain for a period after application. A short delay is usually easier than redoing a finish coat.
If rain threatens, we cover the work or move the coat to another day rather than push ahead. Tell us about any irrigation that reaches the chimney, too, so it can be turned off while the repair cures. We confirm the plan with you in advance and explain how a weather delay affects the sequence.
When a chimney needs a full restucco
Patching has limits. Much of the stucco may have lost its bond, or earlier incompatible repairs may have compromised the surface. Then a full removal and new application can make more sense than a string of patches.
The International Masonry Institute notes that when damage is past the point of repair, removal and reinstallation of a new system may be required. We tell you when we think a chimney has reached that point and show you why. A full restucco is priced as its own option beside the patch approach.
Stucco applied over brick or stone
Stucco is sometimes applied over a brick or stone chimney. Where the joints were not already recessed, the National Park Service notes they were customarily raked out to give the stucco a key. That roughened surface is what the first coat grips.
If stucco over brick has come loose, the brick surface is prepared again before new coats go on. We clean the face, rake joints where needed and dampen the masonry. Where the brick itself is damaged, that repair belongs to masonry work and appears as a separate item.
Parts of a stucco repair you approve
- Removal of failed stucco and old patches
- Finish coat texture matched
- Sealant at stucco transitions
- Workmanship warranty on the repair
Before you approve stucco work in Alameda
What happens if there is rotten wood behind the stucco?
We stop at the agreed boundary and show you what we found. The wood repair is chimney chase repair, a separate item with its own price. The stucco work resumes once the support behind it is sound and you have approved both parts.
Can new stucco go straight over the old surface?
Only where the old stucco is sound, clean and firmly attached, and even then a new finish is a surface treatment. Loose or hollow areas have to come off first. Spreading new plaster over failing stucco usually fails with it.
Why does the stucco near the ground keep breaking down?
The lowest part of the wall often stays wet from splashing rain, irrigation, soil piled against it or a buried weep screed. We check the base conditions and suggest changes you can make, alongside any repair we price.
More Ways to Care for Your Fireplace
- Chimney Cap Installation and ReplacementProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Chimney WaterproofingTreat suitable chimney masonry after checking the surface, repair needs and product requirements.
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo