Fixing chimney stucco and its water source in Boulevard Park Isles
The free inspection covers every accessible face, the top, the roof junction and the base.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
How failing chimney stucco shows itself
- Cracks running through the stucco finish
- White powder on the stucco surface
- Damp marks indoors beside the chimney
- Crumbling stucco close to the ground
Jump to
Stucco repair details that decide the result
Plaster on block and plaster on lath
Stucco can be applied straight onto concrete block or brick. It can also be applied over metal lath fastened to a framed box, with sheathing and a water barrier behind it. From the yard, the two can look identical.
The difference decides the repair. Plaster applied straight to masonry is patched as masonry work. Plaster on lath over framing brings the lath, the barrier and the wood into the conversation. We tell you which assembly we believe you have and how we reached that view.
Preparing the surface before new stucco
New plaster only bonds to a clean, sound surface. Debris, plant growth, dirt, loose paint and oil are among the things to remove from a repair area before patching.
We brush and clean the area inside the cut boundary, remove loose paint at the edges and check that the base is firm. Where earlier repairs used an incompatible material, that may need to come out as well. The preparation is described in the estimate, so the scope is clear from the start.
Looking at the chimney from inside the attic
Where the chimney passes through an accessible attic, the view from inside can be revealing. Stains on the framing, damp sheathing or daylight at the chimney edge all point toward how water is moving.
If you know how to reach the attic, tell us before the visit and clear a path to the hatch. We look only where it is safe to walk and stand. What we see there is noted with the exterior findings, and it can change where we look first outside.
Dark streaks and growth on damp stucco
Dark streaks or green growth on part of a stucco chimney usually mark an area that stays wet. Organic growth needs moisture, so its location is a useful clue. It often sits below a drip, a ledge or a leaking detail.
Gentle cleaning with low-pressure water and soft natural bristle brushes is the approach preservation guidance describes. We follow it where cleaning is part of the scope. More important is why that area stays damp, and we look for the answer before recommending a repair.
Stucco work we separate on the estimate
- Repair boundary cut to sound edges
- Water barrier where framing is exposed
- Exploratory opening with your approval
- Hose water test when the job needs it
Your stucco repair questions, answered
Why does the stucco near the ground keep breaking down?
The lowest part of the wall often stays wet from splashing rain, irrigation, soil piled against it or a buried weep screed. We check the base conditions and suggest changes you can make, alongside any repair we price.
Should I pressure wash the chimney before you come?
Please do not. High pressure can drive water into cracks and loosen weak plaster, which makes the inspection harder to read. Leave the surface as it is, and we will look at it in its current condition.
What should I mention when I call about stucco damage?
Tell us which face is damaged, how large the area looks, whether pieces have fallen and whether there are damp marks inside. Mention any earlier patches. You can reach us by phone to arrange the free inspection.
More Ways to Care for Your Fireplace
- Chimney Cap Installation and ReplacementProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
- Fireplace RestorationCoordinate fireplace repairs while preserving suitable existing features and defining the intended use.
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
- Chimney Masonry RepairRepair affected chimney brickwork and joints with materials selected for the construction already in place.
- Firebox RepairRepair the damaged fireplace chamber using an approach suited to masonry or manufactured components.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo