
Loose stucco on a chimney in Coral Ridge, fixed properly
Lath, beads and screeds that have corroded are replaced, not buried under fresh plaster.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Stucco cracks and bulges worth mentioning
- Cracks running through the stucco finish
- Rust marks bleeding through the finish
- Paint peeling on one chimney face
- Weep screed buried under soil or paving
Jump to
Stucco repair choices for Coral Ridge chimneys
Shielding fresh stucco from strong sun and heat
Heat and direct sun dry fresh stucco from the surface down. The National Park Service recommends shading or covering new work in hot weather and keeping it damp. Base coat makers also suggest working during the cooler parts of the day.
We plan chimney stucco work with the forecast in mind and shade the repair where the setup allows. On a very hot, dry day we may start early or move the finish coat to another visit. You hear about any change to the schedule before it happens.
Setting expectations for a stucco color match
Color in stucco can come from the sand, from pigments or from paint on the surface. Old stucco has also weathered. An exact match on a small patch may not be possible, even with careful testing.
We tell you before the work what level of match to expect. Where the difference would be obvious on a prominent face, one option is to paint or refinish the whole face so the patch disappears. That is a separate item, and you decide whether it is worth it for your chimney.
A family-owned team on your stucco chimney
We are a family-owned, locally owned company. The person who explains your stucco repair is part of the team that stands behind it, and that shapes how we talk about the work.
We explain the base, the cause and the options in plain terms, and we tell you when a smaller repair is enough. If something is outside our scope, we say that too, rather than stretch a job to fit. You get a straight account of the chimney and the choice of what to do next.
Tying a new stucco system into existing details
A full restucco is a chance to correct details that caused problems before. New lath, barrier layers and flashing have to be joined properly to the parts of the house that stay. Getting those joins right matters as much as the plaster itself.
The International Masonry Institute stresses integrating new lath, barriers and flashings with the existing systems. On a chimney, that means the roof junction, the top, the base and any place the stucco meets another material. We describe each of those transitions in the estimate, so none is left to chance.
What the stucco inspection covers in Coral Ridge
- Color sample for exposed faces
- Full-face refinish priced as an option
- Debris cleaned up and hauled away
- Written record of the stucco work
Stucco repair answers for homes in Coral Ridge
Will the repaired stucco match the rest of the chimney?
Texture can usually be matched closely. Color is harder on unpainted stucco, because the old surface has weathered. We explain the likely result before you approve, and we can make small samples so you can judge the match yourself.
How many visits does a stucco repair usually take?
Usually more than one, because each coat needs to cure before the next goes on. The exact plan depends on the size of the repair and the weather. We set out the likely sequence in the estimate, and the curing gaps do not change the agreed price.
Will you need to go into the attic?
Only if there is safe access and the chimney passes through it. The attic can show stains or damp sheathing that explain the outside damage. If you prefer we stay outside, tell us, and we note that the attic was not checked.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo
