Hollow or bulging chimney stucco repaired in Croissant Park
Loose plaster is cut back to sound edges and rebuilt coat by coat, each one cured before the next.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Stucco trouble you can spot from the yard
- Dark streaks below the chimney top
- Old patches cracking at their edges
- A long crack near the roof line
- Gaps where stucco meets the roof
Jump to
Repairing stucco and the base behind it
The scored first coat that anchors a patch
The first coat is scored with a comb while it is still soft. Those grooves give the next coat something to lock into, which is why plasterers call it the scratch coat.
On a chimney patch, we apply it to the cleaned base or to the lath, then let it firm up before the next layer goes on. Putting the next coat onto a scratch coat that is still too wet can weaken the bond. The right gap depends on the weather and the mix, so we plan the visits around it.
Repainting a stucco chimney after the repair
If your chimney was painted before, it will likely need paint again once the repair has cured. New paint should be compatible with the coating already on the surface. Loose and peeling paint needs to come off first, by hand scraping or brushing.
Fresh stucco also needs time before some paints can go on, depending on the product. We tell you when the repair will be ready for paint and whether painting is in our scope or a separate item. The written record lists the patch areas, which helps whoever paints later.
Peeling paint as a sign of damp stucco
Paint that blisters or peels on one part of the chimney can be a clue. Moisture moving out through the stucco can push a coating off the surface. It tends to show first where the plaster stays wet longest.
We note where the peeling is and compare it with the chimney top, the flashing and the ground line. Repainting over damp stucco usually brings the peeling back. Finding and stopping the moisture comes first, and the paint follows once the wall has dried.
When a hose water test helps find a leak
Sometimes the entry point is still unclear after the inspection. Only in that case does a hose water test earn its place. Water is run over one area at a time, starting low, while someone watches inside for the first sign of a leak.
We run a hose water test only when the job calls for it. It takes time and it wets the chimney, so we explain why it is worth doing first. The result tells us which component to repair, which keeps the stucco work aimed at the right place.
Each part of the stucco job, itemized
- Loose stucco area marked and measured
- Weep screed at the base checked
- Finish coat texture matched
- Color sample for exposed faces
Before you approve stucco work in Croissant Park
How many visits does a stucco repair usually take?
Usually more than one, because each coat needs to cure before the next goes on. The exact plan depends on the size of the repair and the weather. We set out the likely sequence in the estimate, and the curing gaps do not change the agreed price.
How does the discount after the free inspection work?
If you approve the work within 72 hours of your own free inspection, a 10% discount applies to it. The window counts from your inspection, not from a calendar date. Ask us about any line on the estimate during that time.
Should I pressure wash the chimney before you come?
Please do not. High pressure can drive water into cracks and loosen weak plaster, which makes the inspection harder to read. Leave the surface as it is, and we will look at it in its current condition.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo