Stucco chimney repair in Little Havana, coat by coat
Debris is cleaned up and hauled away, and the work is backed by our workmanship warranty.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When chimney stucco in Little Havana needs attention
- A bulge or swelling in the plaster
- Hollow sound when the stucco is tapped
- Dark streaks below the chimney top
- Old patches cracking at their edges
Jump to
How we repair chimney stucco in Little Havana
Irrigation spray on the chimney base
Sprinkler heads that wet the chimney on every cycle keep the lower stucco damp. The plaster rarely gets a chance to dry out, and that part of the wall tends to show staining, peeling paint and soft spots first.
Adjust or redirect heads that reach the chimney, especially while a repair is curing. If you are unsure which zone reaches that wall, running the system while we are there can settle it. We mention it in the written record, so the point is not forgotten after the visit.
Reading the lines of a stucco estimate
A clear stucco estimate separates the work into parts you can judge on their own. The repair area, the base repair beneath it, the coats, the finish and any painting each appear as their own lines.
Work on another component, such as the chimney top or the roof flashing, is listed separately with its own price. So is any exploratory opening. You can approve the whole scope or only part of it. Nothing is added without a conversation first, and our pricing is set out upfront.
Tying a new stucco system into existing details
A full restucco is a chance to correct details that caused problems before. New lath, barrier layers and flashing have to be joined properly to the parts of the house that stay. Getting those joins right matters as much as the plaster itself.
The International Masonry Institute stresses integrating new lath, barriers and flashings with the existing systems. On a chimney, that means the roof junction, the top, the base and any place the stucco meets another material. We describe each of those transitions in the estimate, so none is left to chance.
Stucco applied over brick or stone
Stucco is sometimes applied over a brick or stone chimney. Where the joints were not already recessed, the National Park Service notes they were customarily raked out to give the stucco a key. That roughened surface is what the first coat grips.
If stucco over brick has come loose, the brick surface is prepared again before new coats go on. We clean the face, rake joints where needed and dampen the masonry. Where the brick itself is damaged, that repair belongs to masonry work and appears as a separate item.
Line by line on a stucco repair estimate
- Leveling coat brought to the wall plane
- Finish coat texture matched
- Top band under the crown or cover
- Debris cleaned up and hauled away
Common questions on stucco chimneys
Do you fix the source of the water as part of the job?
We find the source during the inspection. If it is the chimney top, the flashing or another component, that repair is listed as its own item with its own price. You decide on each item, and we explain why the order of the work matters.
Do you replace the metal lath or reuse it?
Sound lath that has only pulled away can often be refastened. Corroded or torn lath in the repair area is cut out and replaced with corrosion-resistant lath lapped into what remains. The estimate says which we expect to do.
When is a hose water test part of a stucco job?
No. We run a hose water test only when the job calls for it, usually when the entry point is still unclear after the inspection. We explain why it would help before doing it.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo