Stucco chimney repair in Midtown, coat by coat
The free inspection covers every accessible face, the top, the roof junction and the base.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs chimney stucco is starting to fail
- Cracks running through the stucco finish
- A long crack near the roof line
- Stains in the attic near the chimney
- Cracks that return after painting
Jump to
Stucco repair from base coat to finish
Repainting a stucco chimney after the repair
If your chimney was painted before, it will likely need paint again once the repair has cured. New paint should be compatible with the coating already on the surface. Loose and peeling paint needs to come off first, by hand scraping or brushing.
Fresh stucco also needs time before some paints can go on, depending on the product. We tell you when the repair will be ready for paint and whether painting is in our scope or a separate item. The written record lists the patch areas, which helps whoever paints later.
Covering an open chimney top overnight
Some stucco repairs reach the top of the chimney, where the plaster meets the crown or the cover. If that work leaves the chimney open to weather at the end of a day, it gets covered before we leave.
An open top invites rain into the flue and behind the fresh plaster. Covering it each evening is part of how we work, along with cleaning up and hauling debris away. The cover comes off only when work resumes, and you do not need to arrange anything yourself.
A crack that shows through fresh paint
Sometimes a crack reappears a short time after a chimney is repainted. The paint bridged the crack for a while, but the movement or water behind it carried on.
When that happens, we look at the crack under the paint rather than at the paint. A crack that returns through fresh coating is often active, or it follows lath, a joint or a water path. The repair then targets the cause, and repainting follows only once the crack has been dealt with properly.
Routing a crack before it is filled
A crack that carries water is often widened slightly along its length with a small cutting tool. Routing gives the repair material a clean channel with sound sides instead of a thin, dirty line.
The channel is cleaned and dampened, then filled with a material chosen for whether the crack still moves. The surface is finished to match the texture around it. Routing leaves a neater and more durable line than smearing a patch over the top, and the estimate lists each crack treated this way.
Stucco repair scope for homes in Midtown
- Base condition behind the repair area
- Scratch coat keyed to the base
- Debris cleaned up and hauled away
- Water source listed as its own item
Questions about chimney stucco repair
Can one damaged area be repaired without redoing the whole face?
Often, yes. A defined patch works well where the base is sound and the loose area is limited. We map the hollow zone first. If the color match on a prominent face worries you, refinishing the face is offered as a separate option.
What happens if there is rotten wood behind the stucco?
We stop at the agreed boundary and show you what we found. The wood repair is chimney chase repair, a separate item with its own price. The stucco work resumes once the support behind it is sound and you have approved both parts.
Will you need to go into the attic?
Only if there is safe access and the chimney passes through it. The attic can show stains or damp sheathing that explain the outside damage. If you prefer we stay outside, tell us, and we note that the attic was not checked.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo