Stucco repairs that blend into chimneys in Ojus
If the repair area grows once the wall is open, you approve the change before we continue.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Stucco cracks and bulges worth mentioning
- A bulge or swelling in the plaster
- Pieces of stucco found near the base
- Paint peeling on one chimney face
- White powder on the stucco surface
Jump to
Stucco repair choices for Ojus chimneys
Scheduling stucco coats around rain
Heavy rain on fresh stucco can wash out the surface and mark the finish. The base coat maker's instructions call for protecting new work from rain for a period after application. A short delay is usually easier than redoing a finish coat.
If rain threatens, we cover the work or move the coat to another day rather than push ahead. Tell us about any irrigation that reaches the chimney, too, so it can be turned off while the repair cures. We confirm the plan with you in advance and explain how a weather delay affects the sequence.
What an elastomeric finish can and cannot do
Elastomeric finishes are thick, flexible coatings that can bridge fine cracks. They are one of the finishes used on stucco chimneys, and they can make a surface look uniform again. The choice between a breathable finish and an elastomeric one is made for your chimney, not by habit.
An elastomeric coat does not repair loose plaster, failed lath or a leak at the top. Because it forms a film, it can also slow drying if water gets behind it. We use one only where the stucco is sound, the water source has been dealt with and the product's data supports it.
Questions to ask before approving stucco work
A few questions make a stucco estimate easier to judge. Ask what sits behind the stucco, how the edges of the repair will be cut and how the patch will be cured between coats.
Ask how the color and texture will be matched and whether painting is included. Ask what happens if the repair area grows once the wall is open, and what the warranty covers. We expect these questions and answer them before you approve anything, in writing where it helps.
Keeping stucco dust out of the house
Cutting old stucco with a saw creates fine dust. On a chimney, that dust can drift toward open doors, vents and outdoor furniture near the work area. Wind can carry it further than expected.
Ask us before the visit which openings to keep closed and which items to move. We plan cutting to limit dust and clean the surrounding surfaces when the cutting is done. If anyone at home is sensitive to dust, mention it, and we plan the noisier, dustier steps for a time that suits you.
What we check before pricing stucco work
- Sounding survey of each accessible face
- Lath and fasteners in the repair area
- Crack treatment matched to crack movement
- Finish coat texture matched
Stucco chimney repair, answered plainly
Can one damaged area be repaired without redoing the whole face?
Often, yes. A defined patch works well where the base is sound and the loose area is limited. We map the hollow zone first. If the color match on a prominent face worries you, refinishing the face is offered as a separate option.
What if the old stucco is soft and crumbly?
Soft, sandy stucco may be rich in lime, and a hard cement patch would not suit it. We assess its character first. The repair material is then chosen to be compatible, and we explain the choice before you approve.
Are hairline cracks in the finish worth repairing?
Many are surface matters that a thin slurry or paint can close. We still tap around them and check whether they line up with anything behind the plaster. If both checks are clean, the repair can stay small.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo