Skip to content
(645) 465-4171

Stucco chimney repair in Princeton, coat by coat

Stucco work approved inside 72 hours of your free inspection has 10% off the agreed price.

  • Owned and run locally
  • Available for same-day service
  • Fully licensed and insured
  • Family owned and run

Signs chimney stucco is starting to fail

  • A bulge or swelling in the plaster
  • Pieces of stucco found near the base
  • A long crack near the roof line
  • A vertical crack where chimney meets wall
Jump to

Stucco repair details that decide the result

Dampening block before new stucco goes on

Dry block or brick pulls water out of fresh stucco quickly. Plaster that loses its water too fast cannot cure properly and bonds poorly. Preservation guidance and the base coat maker both call for wetting a masonry base before application.

We dampen the prepared masonry so the surface is moist but not running with water, then apply the first coat. Metal lath is treated differently and is not soaked. The step takes little time, and it is one of the simplest ways to protect the bond of a chimney patch.

Moist curing between stucco coats

Cement plaster gains strength by curing, and curing needs water. The code's plaster section calls for each coat to be kept moist for a period before the next goes on. Base coat makers describe fog curing with a fine mist for the same reason.

On a chimney repair, that means planned return trips or a schedule that allows misting between coats. We explain the curing plan when you approve the work, so the gaps between visits make sense. A patch that skips curing can craze and crack even when the mix was right.

Tying a new stucco system into existing details

A full restucco is a chance to correct details that caused problems before. New lath, barrier layers and flashing have to be joined properly to the parts of the house that stay. Getting those joins right matters as much as the plaster itself.

The International Masonry Institute stresses integrating new lath, barriers and flashings with the existing systems. On a chimney, that means the roof junction, the top, the base and any place the stucco meets another material. We describe each of those transitions in the estimate, so none is left to chance.

Looking at the chimney from inside the attic

Where the chimney passes through an accessible attic, the view from inside can be revealing. Stains on the framing, damp sheathing or daylight at the chimney edge all point toward how water is moving.

If you know how to reach the attic, tell us before the visit and clear a path to the hatch. We look only where it is safe to walk and stand. What we see there is noted with the exterior findings, and it can change where we look first outside.

Stucco repair items we price in Princeton

  • Sealant at stucco transitions
  • Paint on repaired areas where included
  • Protection for paving and plants
  • Workmanship warranty on the repair

Your stucco repair questions, answered

What should I mention when I call about stucco damage?

Tell us which face is damaged, how large the area looks, whether pieces have fallen and whether there are damp marks inside. Mention any earlier patches. You can reach us by phone to arrange the free inspection.

Can you repair the stucco if the chimney top also leaks?

We can, but the top should be dealt with first or at the same time. A patch below a leaking top tends to fail early. The top repair is listed separately, and we explain the order before you approve anything.

When is a hose water test part of a stucco job?

No. We run a hose water test only when the job calls for it, usually when the entry point is still unclear after the inspection. We explain why it would help before doing it.

Proudly American

Local service. Careful repairs. A fireplace worth coming home to.

Call Now (645) 465-4171

Book Your Free Inspection in Miami

(645) 465-4171

Send your details for a free Miami chimney or fireplace inspection. We will call to confirm the appointment.

Chimney & Fireplace Brands We Work With