
Hollow or bulging chimney stucco repaired in Tarpon River
A matched repair mix protects the old stucco around the patch instead of stressing it.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Stucco trouble you can spot from the yard
- Paint peeling on one chimney face
- Dark streaks below the chimney top
- Stains in the attic near the chimney
- Weep screed buried under soil or paving
Jump to
Getting chimney stucco right in Tarpon River
Keeping the stucco base clear of soil and paving
The code keeps the weep screed a set height above soil and above paving so it can drain. Over time, mulch, soil, pavers or a raised walkway can creep up and bury it. We look for that during the inspection.
A buried screed cannot drain, and the plaster near the ground stays wet. Keep landscaping below the bottom edge of the chimney stucco where you can. If a hard surface now sits against it, tell us, and we explain the options without assuming the paving has to come out.
Checking the old coating before adding a new one
A new coating has to bond to what is already on the wall. The International Masonry Institute recommends knowing the type of existing coating and testing how well it adheres before any recoating project.
For a chimney, that can mean a small test area and a check of whether the old coating lifts. If it does, it needs removing where it has failed. We tell you what the test shows and how it affects the scope, rather than coating over a surface that is already letting go.
When a chimney needs a full restucco
Patching has limits. Much of the stucco may have lost its bond, or earlier incompatible repairs may have compromised the surface. Then a full removal and new application can make more sense than a string of patches.
The International Masonry Institute notes that when damage is past the point of repair, removal and reinstallation of a new system may be required. We tell you when we think a chimney has reached that point and show you why. A full restucco is priced as its own option beside the patch approach.
Why stucco is not cleaned with high pressure
High-pressure washing can drive water into cracks, erode the finish and loosen weak plaster. On a chimney, it can also push water past the top or the flashing and into the house.
The National Park Service suggests low-pressure washing and soft brushes for stucco, and warns that textured surfaces are hard to clean without removing some of the texture. If the chimney has been pressure washed recently, tell us, because that can explain fresh cracks or damp areas we find during the visit.
Each part of the stucco job, itemized
- Water barrier where framing is exposed
- Crack treatment matched to crack movement
- Color sample for exposed faces
- Water source listed as its own item
Stucco repair answers for homes in Tarpon River
Can one damaged area be repaired without redoing the whole face?
Often, yes. A defined patch works well where the base is sound and the loose area is limited. We map the hollow zone first. If the color match on a prominent face worries you, refinishing the face is offered as a separate option.
How does the discount after the free inspection work?
If you approve the work within 72 hours of your own free inspection, a 10% discount applies to it. The window counts from your inspection, not from a calendar date. Ask us about any line on the estimate during that time.
Is chimney parging the same thing as stucco?
On the outside of a chimney they are closely related, and people use the words loosely. Both are cement coatings over masonry, and we repair them the same way. Parging inside a smoke chamber is a separate job with different materials.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo