Loose stucco on a chimney in Twin Lakes North, fixed properly
Lath, beads and screeds that have corroded are replaced, not buried under fresh plaster.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Stucco cracks and bulges worth mentioning
- A bulge or swelling in the plaster
- Damp marks indoors beside the chimney
- Crumbling stucco close to the ground
- Gaps where stucco meets the roof
Jump to
Stucco chimney repair work in Twin Lakes North
How the chimney top feeds water into stucco
Horizontal surfaces take rain directly and hold it longest. The National Park Service singles out the tops of chimneys as especially vulnerable on stucco buildings. Water that soaks in at the top can travel down behind the finish.
Before patching cracks lower down, we look at the top band of stucco, the crown or cover above it and the joint between them. A patch below a leaking top tends to fail first. If the top needs work, you see it as its own item and decide on it separately.
Store-bought patching products on a chimney
Many patching products sold for stucco are meant for small, sheltered repairs. On a chimney, some of them bond poorly to the old plaster or behave very differently in sun and rain.
If you have tried a patch yourself, tell us what you used and roughly when. We may be able to leave it, or it may need to come out before a lasting repair can bond. Either way, knowing what is there saves time during the inspection and makes the estimate more accurate.
Control joints on larger stucco faces
Large stucco surfaces can crack as the plaster shrinks while it cures. Control joints are planned lines that give that movement a place to go, so the cracking happens where it is meant to.
The standard for plaster application sets how control joints are spaced, and base coat makers refer back to it. A small chimney patch rarely needs one. A full restucco on a wide chimney face may. Where an existing joint is present, we keep it in the same place rather than plaster over it.
The order of work on a stucco repair
A stucco repair follows a sequence, and each step depends on the one before. Water sources come first, then removal of loose plaster, then repair of the base, lath or barrier.
After that come the scratch coat, the leveling coat and the finish, each given time to cure. Paint, if it is part of the job, comes last. The estimate lists these steps in order, so you can see where each visit fits and why the work is spread out the way it is.
What a clear stucco quote should include
- Sealant at stucco transitions
- Protection for paving and plants
- Debris cleaned up and hauled away
- Hose water test when the job needs it
Before you approve stucco work in Twin Lakes North
Do you fix the source of the water as part of the job?
We find the source during the inspection. If it is the chimney top, the flashing or another component, that repair is listed as its own item with its own price. You decide on each item, and we explain why the order of the work matters.
Can you restucco a chimney that has many layers of paint?
Yes, but the paint layers matter. Loose paint has to come off, and a heavily painted surface may need a bonding agent or full removal before new stucco can grip. We test the surface and explain the approach in the estimate.
Can you repair the stucco if the chimney top also leaks?
We can, but the top should be dealt with first or at the same time. A patch below a leaking top tends to fail early. The top repair is listed separately, and we explain the order before you approve anything.
More Ways to Care for Your Fireplace
- Chimney Cap Installation and ReplacementProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
- Chimney Leak RepairFind the chimney water entry point and plan a repair before restoring the damaged finish.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo